test-drb

test-drb@ccmp.vtda.org

101090 discussions

by sales＠elecplus.com

No part number or date is visible. Complete, but not cleaned or tested. I have no idea what it went to. https://www.elecshopper.com/old-wang-terminal-keyboard.html Cindy Croxton Electronics Plus 1613 Water Street Kerrville, TX 78028 830-370-3239 cell sales at elecplus.com --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

8 years, 2 months

VT100 keyboards for parts/repair

by sales＠elecplus.com

I have 2 in stock. https://www.elecshopper.com/dec-vt100-keyboard-for-parts-or-repair.html Cindy Croxton Electronics Plus 1613 Water Street Kerrville, TX 78028 830-370-3239 cell sales at elecplus.com --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

8 years, 2 months

XpressWare v8.1 or above (software for Tektronix X11 terminals)

by carlojpisani＠gmail.com

hi, In 1990s Tektronix produced digital video X terminal and introduced X server software based on VxWorks v5 (Windriver). Later they introduced a new line of terminals, at some point a company called NCD bought the Tektronix X11-terminals division and started to produce their own line, called NCD-terminals with a software called "NCD-bridge" Anyway, both the 200-series and the 400-series of the Tektronix X11 terminals boot from a directory on a server via NFS or TFTP, either way, you need to create a directory for the terminal to boot from, and install a number of files. These files are provided as "Tektronix XpressWare version 8.0 (or later)". The 200-series can bootstrap from v7 ( one of the member of my team owns an original CD), but the 200-series needs the v8 or later (we don't have). Unofficially, you might look for NCD, the Company who bought the X-terminals division from Tektronix; they had (note the past tense) some software in the form of patches, accessible by anonymous ftp. There aren't any complete releases, but there were archives which contains much that is useful to be found in the ftp, in particular patches containing bits of version 8.1 of XpressWare; enough to form the basis of a working installation. Unfortunately, the archive is gone, no more available. Let me know if you have the software or if you know where/how to find it, otherwise, X11-terminals like X400 can't be functional. Thanks

8 years, 2 months

Motorola MC68882 user manual (paper copy)

by carlojpisani＠gmail.com

hi I am looking for a paper copy of the Motorola MC68882 user manual (it's a floating point unit) let me know if you have for sale thanks

8 years, 2 months

downthebunker bazaar, new domain

by carlojpisani＠gmail.com

we have recently bought a domain http://www.downthebunker.xyz and a subdomain http://deals.downthebunker.xyz/ you can reach us there :) I am also working on a new engine, and probably we will also add HTTPS thanks

8 years, 2 months

DEC FPJ11-AA

by pbirkel＠gmail.com

https://www.ebay.com/itm/DEC-PDP-11-84-M8190-AE-Module-FPJ11-AA/113112634277 IMO a really good deal on an 18 Mhz FPJ11-AA. Those don't seem to come up much . Not my item, but I have previously purchased from this seller and he's reliable. -----

8 years, 2 months

DEC FPJ11-AA

by jnc＠mercury.lcs.mit.edu

> From: Bill Gunshannon > Anybody have any PMI memory modules they might let go for less than my > first born male child? The DEC PMI memories are the MSV11-J and (I think) the MSV11-R. The latter is rare, but the -J's can be found. VARx sold me some -JE's a couple of years back for a good deal less than their listing price: http://www.varx.com/CAT/MEMORY-DEC_MSVXX.HTML The other possibility is that Clearpoint made some PMI memories, which one can occasionally find on eBait, etc: the QED1 (aka QED-F) and DCME-Q4E (they look the same, so I'm not sure if they are actually different, or if the names were just changed for marketing reasons). Alas, I know of no documentation on either. (If anyone has any, _please_ share it!) I am slowly trying to work out how to configure them (they can be configured to run PMI or normal QBUS); contact me privately for what little I have so far. Noel

8 years, 2 months

DEC FPJ11-AA

by jnc＠mercury.lcs.mit.edu

> From: Pete Turnbull > Bill would want the -JD (2MB) version (the -JE version is 4MB so too > big). Err, the -JD is 1MB, and the -JE is 2MB (see e.g. EK-MSV1J-UG-001, pg. 1-3). Noel

8 years, 2 months

DEC FPJ11-AA

by jnc＠mercury.lcs.mit.edu

> From: Paul Birkel > Same thing in this case. The CPU looks to see a PMI signal that is generated by the KTJ11 - no signal -> 11/83. My impression is that except for the speed of the J11 (and the crystal), and whether or not it came with the FPJ11, all four of the M8190 board variants are otherwise identical. Whether it's a /73, /83 or /84 depends entirely on whether it has/sees PMI memory and the KTJ11-B UNIBUS converter (and the correct backplane, for the latter, of course). > The 11/84 is an 11/83 extended by a Unibus interface to support legacy > peripherals. It has a special backplane which is mostly UNIBUS slots, with a few QBUS/PMI slots on the front, and a 'special' slot in the middle into which the UNIBUS adapter goes. Noel

8 years, 2 months

simh pdp8 question

by engwalljonathanthereal＠gmail.com

My pdp8 seems to have very space. I want to try fortran iv. I can't even compile hello world without getting: $SY

8 years, 2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb