Hi all --
I'm working on fixing up a Tektronix 4404 workstation (runs
Smalltalk-80!).? Or rather, I'm trying to collect the needed parts to
assemble a complete system so that I might fix up said system -- at the
moment I have only the main CPU unit (but hey, it's a good starting
point).? I am looking for:
- Keyboard (Tektronix P/N 119-1872-00)
- Mouse (Logitech P7-3F-TX-19-1808-00).? This is likely a standard
3-button quadrature mouse but if I can find the exact match, so much the
better...
- Mass Storage (Tektronix model 4944, possibly others?? This is a SCSI
device containing a hard drive on a SCSI->MFM bridge and 5.25" floppy
drive on a custom SCSI->floppy interface.)
If anyone happens to have spares or knows anyone who might, please let
me know.? Thanks as always!
- Josh
So, all this talk about panels made me making an oak frame for an
IBM panel I had lingering around in the attic for a while.
Still need to make a back panel to close it tough.
http://bit.ly/2HI2cHC
The cables were already cut when I got it.
Ed
--
Ik email, dus ik besta.
Hi folks,
I recently, on a trip to Oregon, finally got a compatible ECL monitor for my Sun 2. It came with a rather nice Sun 3/260, which I?d like to run as well.
So I thought I?d put out a beg here- I?m so close to finishing this.
I need to shake loose a keyboard and mouse for a Sun 2.
Would anyone be willing to sell me one? I?m not expecting a handout; they would be paid for and well loved.
On a related note, I?d love to run the 3/260 as well: What I?d like to do for that is hunt down a Sun color framebuffer for it so I can use a more common display. (and of course, enjoy the wonders of color).
I?m not sure what the options there are, but I have a nice scan converter so just about any compatible color framebuffer will do. I can then totally repurpose the monitor I?ve just found for my 2/120.
So, in the words of another immortal list member, ?advice hints ?????
Thanks in advance,
- I
I have a small, 5-20 stack of 16 mm's of movies dealing with computers
The one in front of me is
"Once Upon a Punched Card"
I am looking for a place in the USA with a reasonable price to have them
digitized and I will place them on both my Google drive and a Youtube
So far I have only been able to find places I can not afford.
Suggestions, Ideas, etc ?
-pete
I'm about to acquire a couple of 1980s-vintage military surplus AN/UGC-137A terminals (i.e., glass TTYs with some local message preparation and storage capabilities) which have a bubble memory subsystem. They use plug-in cartridges containing 256 kbytes of storage in the form of two Intel 7110 1 Mbit bubble memory chips and their 7242 formatter/sense amplifiers.
One of the cartridges contains the one and only copy of the terminals' firmware, which I believe they need to load up at each reboot. Naturally, extracting the contents of that irreplaceable cartridge for archival, and potential future emulation, is going to be a very high priority for me. I have a few different approaches in mind for accomplishing that. One approach would be to remove the two memory devices from the critical cartridge in order to dump their contents in an independent bubble memory subsystem.
With that in mind, I'd like to get my hands on a working Intel 7110 bubble memory subsystem, or the parts to build one myself (i.e., a complete 7110/7220/7230/7242/7250/7254 chipset that I could make a board around).
Might anybody here have what I need available for sale or trade? I might be able to use some arbitrary old computer or other device that has a subsystem based around the Intel 7110, or a development kit such as the Intel BPK-72, or a chipset to make my own board.
If I can't acquire or make the hardware to dump the memory chips outside of their native system, then I think my next option would be to passively snoop the host bus interface of the Intel 7220 controller I expect to find inside the terminals as they perform their initial firmware load, so that I can reconstruct the cartridge contents from the trace data.
The terminals were made by the Librascope division of Singer, and brochures can be found here:
http://www.librascopememories.com/Librascope_Memories/Product_Literature_fi…http://www.librascopememories.com/Librascope_Memories/Product_Literature_fi…http://www.librascopememories.com/Librascope_Memories/Product_Literature_fi…
I already have the critical cartridge in hand, and I posted some pictures of it on Twitter:
https://twitter.com/nf6x/status/964578291767173120
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
Recently, I?ve started working on a Canon BX-1 machine dated 1977.
It was CANON's first standalone business / home computer featuring I guess the Motorola MC6809 CPU, one line of gas plasma display a thermal printer and 125k floppy drive.
See pictures here: https://drive.google.com/open?id=1rT4qwtiR68AN5DRqoCwjxGDJvRRdlHha
In working condition but without manuals or disks. Only little can be found for this machine, its not listed in http://www.bitsavers.org/pdf/ nor https://amaus.net/static/S100/
Also http://archive.computerhistory.org/ isn't mentioning the machine.
So I would be happy, if anyone can help in disk images or manual scans (manual front pages are shown in the picture link above)
regards Thomas
Known CANON BX-1 Disk/Documents
Disks:
MCX OPERATING SYS. STANDARD BASIC AND BOOT
MCX SYSTEM DISK
MCX EXTEND BASIC BOOT. PROGRAM, GL SYSTEM, TM_P CALC, FORCE FORM
Manuals:
CANON BX-1 INSTRUCTIONS
CANON THE INSTRUCTION TO THE BX-1
CANON EASY PROGRAMMING PART I
CANON EASY PROGRAMMING PART II
CANON OPERATION MANAUL AND EXPLANATION OF INSTRUCTIONS
https://photos.app.goo.gl/EfDc3rRMfyfTNdgw2
>From my days at Burroughs writing hardware test programs
96 col cards were the standard on the later 1700's
I had full access from midnight to 7AM but the shop was window only
until the next night.
Turn around time during the day could be as much as 4 hours.
-pete
I thought I would post a heads for
https://photos.app.goo.gl/36CxlZQJDssj5uLh1
I have the IBM 360 aluminum plate that goes on top, it is scratched. More
detailed and better pictures as I dig deeper.
For shipping a I will have professional box built by a friend who's hobby
is building
and restoring furniture.
Price to be determined and will go into my estate.
If interested please email me directly
pete at petelancashire dot com
Regards
-pete
> Before that, I have been using pine (nowadays named alpine), which had
> configuration edited via builtin options editor and before that, elm,
> never configured by me (AFAIR - about 20yago). So, with this
> perspective, I can say mutt is not bad and I intend sticking to it for
> a while.
What about mutt do you prefer over alpine?
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://scarlet.deltasoft.com - Get it _today_!