test-drb

test-drb@ccmp.vtda.org

101090 discussions

Looking for Heath H-29 operation manual and schematic

by aek＠bitsavers.org

Just put a working one together from parts from two different auctions and I'd like to find the rest of the documentation. H-19s are pretty common, H-29s not so much so. Haven't been able to find the docs on line anywhere.

8 years, 7 months

Looking for a home

by rlloken＠telus.net

On Sun, 4 Feb 2018, Pete Lancashire via cctalk wrote: > One of the Suns is a Sun1 pre-production Perhaps a pre-production Sparc? I had a long personal relationship with a Sun-1 and nothing there looks remotely like a Sun-1. -- Richard Loken VE6BSV : "...underneath those tuques we wear, Athabasca, Alberta Canada : our heads are naked!" ** rlloken at telus.net ** : - Arthur Black

8 years, 7 months

DEC Storageworks

by rlloken＠telus.net

On Sun, 4 Feb 2018, Douglas Taylor via cctech wrote: > The alphaserver 1000a I have has a storageworks array. > > The disk carriers are green in color, I see storageworks disks for sale on > ebay that are blue.? What is the difference? Are they interchangeable? > > Is it possible (or even wise) to open one of the green carriers and change > the disk out? Yes, the disks are interchangeable. I have used blue disks in a green shelf and green disks in a blue shelf. The modules come apart fairly easily and you can replace the drives or remove drives and use them as ordinary SCSI drives elsewhere - I have done that too. DEC and Compaq also sold DLTs in a StorageWorks module those can also be taken apart and the drive replaced but they are harder to get apart and you must pay attention if you hope to get it reassembled properly. > > Doug > > -- Richard Loken VE6BSV : "...underneath those tuques we wear, Athabasca, Alberta Canada : our heads are naked!" ** rlloken at telus.net ** : - Arthur Black

8 years, 7 months

MicroVAX Diagnostic Monitor, Version 5.0, Release 139 on CD-ROM?

by glen.slick＠gmail.com

According to the document referenced below the MicroVAX Diagnostic Monitor, Version 5.0, Release 139 was available a CD-ROM media, where QZ-K32AA-H8 was the order number of the CD-ROM media kit. So the question is, does anyone happen to have a copy of that MDM CD-ROM? Or any versions of MDM on CD-ROM? MicroVAX Diagnostic Monitor Release Notes Order Number: AA-PK29E-TE These release notes describe restrictions, undocumented features, and other essential information about the MicroVAX Diagnostic Monitor (MDM) Version 5.0, Release 139. These release notes supersede all other MDM documentation. http://manx-docs.org/collections/mds-199909/cd1/vax/pk29ete.pdf

8 years, 7 months

wonky eproms

by dave＠661.org

I have a few tubes of ST-branded M27C256B UV-erasable EPROM chips. All of these fail to program starting at 0x200 until 0x27F. At 0x200, 0x00 is written, then until 0x27F, the bytes are 0xFF. What would cause this? Can it be fixed by an extra-long time in the eraser? Should I just break out the hammer? At least I know the programmer is capable of programming a TI-branded 27c256 and 29c256 flash chips. Might there be a bug in the programming software? FWIW, I'm using a Minipro TL855. Linux software is available at Github: https://github.com/vdudouyt/minipro -- David Griffith dave at 661.org A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?

8 years, 7 months

IBM 5100 to 5110 Transitional Model

by santo.nucifora＠gmail.com

HI Wayne, I believe the KVA is increased because of the extra memory card. I have a 5100 with 0.4 and another with 0.336. The 0.4 has an extra memory card and is BASIC and APL as opposed to just BASIC. The printed 5100 badging on the front is not consistent but sometimes if it doesn't have it printed on the front, it's on a silver metallic emblem embedded in the top cover. If the 5100 badging is printed on the front, it may or may not have the silver metallic badge on the top cover. I have a top emblem model and a top emblem-less model yet both have the 5100 badging printed on the front. If you look at other photos on the net, you will see others with no front printed badging. This particular one had no front badging but has the emblem in the top cover and I think this is normal. I'm not sure which one is earlier/later but I would imagine that is why there is a difference. I can't explain the 5110/5100 difference on the bottom. Hope this helps. On Sat, Feb 3, 2018 at 6:15 PM, Wayne Smith via cctalk < cctalk at classiccmp.org> wrote: > Has anyone noted this listing of what the seller is calling an "IBM > 5100" on Ebay? > > https://www.ebay.com/itm/IBM-5100-B1-Basic-Language-16k-Memory-Powers- > on-monitor-works-but-no-text/112776476816 > > While it is listed as a 5100, it lacks the 5100 badging on the front > center panel (to the right of the power switch). In addition, the > indicia on the bottom > (https://i.ebayimg.com/images/g/9VYAAOSwaC9aapB-/s-l1600.jpg) > indicates both models 5100 and 5110, and the KVA is listed at 0.4 > whereas 5100s are 0.336. Compare the typical indicia on the bottom: > https://tinyurl.com/ybmvms7u. > > The serial number is in the 5100 format of 10-1XXXX, but this unit has > the highest serial number I have seen on a 5100 (10-15687). > > > I am guessing that this is some sort of transitional version or > perhaps a 5110 "prototype". > > Any thoughts? > > -W > > >

8 years, 7 months

IBM 5100 to 5110 Transitional Model

by wayne.smith＠charter.net

Has anyone noted this listing of what the seller is calling an "IBM 5100" on Ebay? https://www.ebay.com/itm/IBM-5100-B1-Basic-Language-16k-Memory-Powers- on-monitor-works-but-no-text/112776476816 While it is listed as a 5100, it lacks the 5100 badging on the front center panel (to the right of the power switch). In addition, the indicia on the bottom (https://i.ebayimg.com/images/g/9VYAAOSwaC9aapB-/s-l1600.jpg) indicates both models 5100 and 5110, and the KVA is listed at 0.4 whereas 5100s are 0.336. Compare the typical indicia on the bottom: https://tinyurl.com/ybmvms7u. The serial number is in the 5100 format of 10-1XXXX, but this unit has the highest serial number I have seen on a 5100 (10-15687). I am guessing that this is some sort of transitional version or perhaps a 5110 "prototype". Any thoughts? -W

8 years, 7 months

RX02 Emulator Problem

by bill.gunshannon＠hotmail.com

I finally got a system running again and hooked up my first AK6DN RX02 Emulator.? Worked, up to a point.? I can boot >from it and read and write to it.? However, every once once and a while after doing a bunch of accesses the Green LED stays on and the system freezes.? Sometimes I can get back out of it with Control-C but sometimes it is locked? up so tight I have to reboot to get out of it. Anybody else see this behavior? bill

8 years, 7 months

Data IO 29B / Unipak 2B adapter?

by mattislind＠gmail.com

I need to read a couple of Signetics 82S215 bipolar PROMs with my old Data IO 29B / Unipak 2B. But it needs a 351B-068 adapter. Does anyone has information regarding this adapter? I did find an old post in DATA_IO_EPROM at groups.io mailinglist that a man named Alfred Marin had boards. I even found his email but it bounced. Any other pointers in this subject? /Mattis

8 years, 7 months

SUN AUDIO BREAKOUT BOX CABLE 530-1594-01

by bill.gunshannon＠hotmail.com

Any Sparc aficionados out there?? I have one of these available. make an offer (+ postage). bill

8 years, 7 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb