Beginning of the 70's I was using a pdp-10 at TSL (Time Sharing Limited, UK)
over a phone line writing logic simulation software in Fortran. Remember it
fondly, especially the number of times I needed to redial in and try to
reconnect to my session. Still smell the teletype. Cost about ?10 for the 20
seconds cpu-time or so just to compile the program!!!
Roll on a few years and I was actually at the console of a 10 at Smiths
doing IC layout graphics interactively on their Lady Jane suite. What a
great single-user machine!
(and I still remember my username and password from TSL, typed it so often
it burned in).
Bob
> -----Original Message-----
> Date: Tue, 24 Oct 2017 18:42:42 +0100
> From: "Rob Jarratt" <robert.jarratt at ntlworld.com>
> To: "'Dave Wade'" <dave.g4ugm at gmail.com>, "'General Discussion:
> On-Topic and Off-Topic Posts'" <cctalk at classiccmp.org>, "'Kip
> Koon'"
> <computerdoc at sc.rr.com>
> Subject: Re: Which Dec Emulation is the MOST useful and Versatile?.
> Message-ID: <003101d34cef$7eca53c0$7c5efb40$(a)ntlworld.com>
> Content-Type: text/plain; charset="us-ascii"
>
>
>
> Ah the PDP10! Although the very first computer I used was a PDP11, it
> was so briefly that I really consider the PDP10 (in DECSYSTEM-20 form)
> to be my first computer. It is easy to emulate in SIMH, although the
> SIMH emulation is of a less capable processor (KS10) and I think KLH10
> is the best emulator for that (but I have never used it).
>
...
>
> Rob
Here is an interesting mini-documentary on the fight Gilbert Hyatt (patent
holder for the concept of the microcomputer) had with the Franchise Tax
Board of State of California:
https://youtu.be/rfyPZdSBwBQ
Sellam
Yes, but the irony if us replying on-list isn't lost.
-------- Original message --------From: Robert via cctalk <cctalk at classiccmp.org> Date: 10/24/17 11:40 AM (GMT-06:00) To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> Subject: Re: Is it really that quiet out there?
The last one that I received was October 20th.
Robert
oddly there were times you could dial into a broken dec 10 connect
and end up connected to someone elses session.... Ed#
In a message dated 10/25/2017 2:18:30 P.M. US Mountain Standard Time,
cctalk at classiccmp.org writes:
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Robert
> Adamson via cctalk
> Sent: 25 October 2017 20:56
> To: cctech at classiccmp.org
> Subject: Digression - Ah Yes!! The PDP-10
>
> Beginning of the 70's I was using a pdp-10 at TSL (Time Sharing Limited,
UK)
> over a phone line writing logic simulation software in Fortran. Remember
it
> fondly, especially the number of times I needed to redial in and try to
> reconnect to my session. Still smell the teletype. Cost about ?10 for the
20
> seconds cpu-time or so just to compile the program!!!
>
I used to use the DECSYSTEM-20 from a Teletype (until they got replaced by
VDUs). That is why I really wanted a nice Model 33 ASR, which I now have.
I
sometimes connect it up to SIMH running TOPS-20 to relive the happiest part
of my school days.
> Roll on a few years and I was actually at the console of a 10 at Smiths
doing IC
> layout graphics interactively on their Lady Jane suite. What a great
single-user
> machine!
>
> (and I still remember my username and password from TSL, typed it so
often
it
> burned in).
>
Hi,
In case anyone is interested, I have finally cobbled together a web page
that documents the construction of the Popular Electronics Cyclops camera
that I exhibited at the 2016 VCF East. It also documents my work to produce
a Cromemco S-100 Cyclops that I hope to exhibit at the 2018 VCF East. The
page is here:
http://wsudbrink.dyndns.org:8080/cyclops/index.html
The Cromemco S-100 Cyclops starts down the page a bit.
Bill S.
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Hello,
the vertical heat sinks for the TO220 with this design are fairly common, I
saw them many times on various boards.
However, as they are simply aluminum parts, you can clean them for sure.
After removing the screw, you could try simply with an hard brush.
If badly corroded, remove the bubbles of oxide with a thin sanding paper,
then you could restore the opaque aspect submerging for few seconds in
caustic sodium solution. Be aware to protect eyes and skin!
Replace the RIFA X2 capacitor!!!!
Andrea
Anybody familiar with the internals of these disks? I have one here
which seems to have the positioner stuck at track zero. I'm not sure
whether it's likely to be just a bit sticky and in need of some
assistance or whether there is some sort of latch involved, and I am a
bit reluctant to just pull the lid off the chamber to find out.
Thanks
Phil
IT RUNS MEMORY RESIDENT LOADED FROM PAPER TAPE?
ED#
In a message dated 10/20/2017 7:37:48 A.M. US Mountain Standard Time,
jwest at classiccmp.org writes:
"Forth-like" system that is well developed/flushedout. So in addition to
BASIC, you get oh-so-many-wonderful-things. I very highly recommend that
anyone messing with 21mx/1000 systems take a good look at HP-IPL/OS.