test-drb

test-drb@ccmp.vtda.org

101090 discussions

by steve＠oldcomputers.net

Here's the page for now for your perusal - the temporary URL is subject to change. http://oldcomputers.net/some-collectors.html There's a submit button in the upper right, but it just emails me. The entry field in the upper left is kind of fun - enter a valid address or location, select it from the drop-down box, and it takes you there. It also gives GPS coordinates.

9 years, 3 months

For Sale: RCA COSMAC VIP with SC/MP II co-processor

by sellam.ismail＠gmail.com

This is a very cool COSMAC VIP that has been slightly modded to act as a front-end processor for an SC/MP II processor board with a custom-built front panel for the SC/MP as well as some interesting add-ons for the VIP (PROM programmer, Tiny BASIC ROM card, CDP1855 math co-processor) and more. Full description and links to photos here: http://www.vcfed.org/forum/showthread.php?58035-RCA-COSMAC-VIP-with-SC-MP-I… I also produced a video to show off the setup for historical purposes: https://www.youtube.com/watch?v=BozGSTumwXc Thanks! Sellam

9 years, 3 months

Help cloning an SGI boot drive

by mazzinia＠tin.it

Hello, I tried to clone a boot drive ( on a bigger one ), using one of the scripts on nekochan. The disk was initialized , labelled Then formatted by the script, and cloned. The data is present if I mount it The issue starts when I change the id and try to boot from it... this is what I get esf read error, bad count esf read error, bad count no file system found for "unix". unable to execute dksc(0,1,0)unix: media not loaded autoboot failed dksc(0,1,0)unix: media not loaded >From Prom, ls gives : dksc(0,1,8)/: sgilabel sash symmon esf read error, bad count no file system found for "/". Any suggestion is accepted. Alessandro

9 years, 3 months

HP9816 keyboard plunger wanted.

by mattislind＠gmail.com

Hello! I recently received a HP9816 machine. The previous owner originally got the machine without a keyboard but subsequently sourced a keyboard off ebay. Unfortunately this keyboard was not in the best shape. One key was stuck and when taking it apart it was evident that it has taken a bath for quite some time. At least the electronics around the space bar were quite affected with corrosion. Luckily this keyboard is quite simple design with only CMOS 4XXX IC, and better yet, Tony Duell has already reverse engineered it (together with the rest of this little machine). Thanks a lot Tony! But the stuck key appeared to be cause by the "plunger" (is that the correct english word?) is slightly cracked in the corner. When the keytop is inserted it is not sliding very well. I have not found a method of repairing it so I am asking the community if there are anyone that has spare "plungers" for the HP9816 keyboard. http://i.imgur.com/q5aRQnC.jpg?1 http://i.imgur.com/67xWZ8q.jpg?1 http://i.imgur.com/cGWCKFw.jpg?1 This is the keyboard at the hpmuseum.net page: http://www.hpmuseum.net/images/200serieskeyboardsmall-35.jpg /Mattis

9 years, 3 months

Random musing: VCB02 on VAX-11/750

by derschjo＠gmail.com

So I had a random thought in the wee hours this morning and I leave it to you, the cctalk braintrust, to tell me exactly how stupid this idea is: I have a VAX-11/750, an Able QNiverter (UNIBUS->Qbus adapter), a 22-bit Qbus backplane, and a VCB02 (QDSS) 4-bit graphics boardset. Theory: With an appropriately modified NetBSD driver for the VCB02, such that it provides only 18-bit addresses to the VCB02's DMA engine, I can get X running on the VCB02 on the 11/750. That is, the configuration is: 11/750->Unibus->QNiverter->Qbus->VCB02. Obviously the console functionality of the VCB02 won't work since that requires support on the VAX side of things that won't be present, but I think everything else should work. I've browsed the technical manual and I don't see anything that should get in the way, I'll just need to hack up the driver appropriately. But this is something that randomly popped into my head (I was inspired by a research paper, "A VAX Based Data Acquisition Computer System at the Nuclear Structure Research Laboratory" wherein a Matrox QRGB Qbus graphics board was lashed to an 11/750 in a similar manner... What say you all? - Josh

9 years, 3 months

What connector is this?

by mattislind＠gmail.com

Can someone tell me what kind of connector this is: http://i.imgur.com/ZvLLQSO.jpg?1 A source for a mating male connector is appreciated! /Mattis

9 years, 3 months

Run/Stop switch from a Soviet S/370 clone

by lproven＠gmail.com

My flatmate has one of these. Just the small subassembly with the 2 push-buttons and a red light between them. Is this something that would be of interest to anyone? I'm trying to persuade him to eBay it instead of throwing it away. We've also got the plastic covers from a few disk packs, an empty metal chassis and a few other odds and sods. Sadly most of the machine was binned long long ago. :-( -- Liam Proven ? Profile: https://about.me/liamproven Email: lproven at cix.co.uk ? Google Mail/Talk/Plus: lproven at gmail.com Twitter/Facebook/Flickr: lproven ? Skype/LinkedIn/AIM/Yahoo: liamproven UK: +44 7939-087884 ? ?R/WhatsApp/Telegram/Signal: +420 702 829 053

9 years, 3 months

In Hong Kong any old computing places to go?

by cliendo＠gmail.com

Im working in Hong Kong the next few weeks and I was wondering if there is a place of interest I should check out

9 years, 3 months

AW: Re: Rack-mounting a TU56

by gerhard.kreuzer＠liftoff.at

Hi, will join a group buy, need caps for 2 drives .. With best regards Gerhard -----Urspr?ngliche Nachricht----- Von: cctalk [mailto:cctalk-bounces at classiccmp.org] Im Auftrag von cctalk-request at classiccmp.org Gesendet: Montag, 06. M?rz 2017 19:00 An: cctalk at classiccmp.org Betreff: cctalk Digest, Vol 33, Issue 6 Send cctalk mailing list submissions to cctalk at classiccmp.org To subscribe or unsubscribe via the World Wide Web, visit http://www.classiccmp.org/mailman/listinfo/cctalk or, via email, send a message with subject or body 'help' to cctalk-request at classiccmp.org You can reach the person managing the list at cctalk-owner at classiccmp.org When replying, please edit your Subject line so it is more specific than "Re: Contents of cctalk digest..."

9 years, 3 months

Ebay - PDP-8/M

by anders.k.nelson＠gmail.com

Oh boyee: http://www.ebay.com/itm/112414315290 I thought the M variants all had blank front panels and bootstraps, but this has all the pretty stuff! How difficult are those switchers to fix for one trained in EE, but better at debugging logic? =] -- Anders Nelson +1 (517) 775-6129 www.erogear.com

9 years, 3 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb