25 Mar
2016
25 Mar
'16
5:29 a.m.
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Dave
Wade
Sent: 25 March 2016 12:16
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
Subject: Re: Olivetti M24 Mounting Bushes for Bus Converter
Could they be 3d printed? Pictures might help...
There are actually two varieties. The plastic ones probably could, but actually I was
talking about the steel ones which probably can't. I have put it all away again for
now so I can't get any pictures right now. I'll get it out again later, if I can,
and post some pics.
Regards
Rob
On 25 Mar 2016 09:20, "Robert Jarratt"
<robert.jarratt at ntlworld.com> wrote:
> The M24 I got the other day has the bus converter, whereas the other
> M24 that I already had does not. I bought a bus converter for the
> "old" one, but then realised I didn't have any mounting bushes or
> spacers in order to install it. I thought of removing some of the
> bushes from the new one to share with the old one, it wouldn't be as
> good but at least I would be able to install the converter.
>
>
>
> It looks like I might need some kind of special tool to remove the
> bushes from the new machine. Is there a way to do this with ordinary
> tools? Does anyone know if the mounting bushes are any kind of
> standard part that could still be bought somewhere?
>
>
>
> Thanks
>
>
>
> Rob
>
>