25 Apr
2011
25 Apr
'11
5:37 a.m.
From: Patrick Finnegan: Sunday, April 24, 2011 3:29 PM
These are definitely not the depths of the cuts. I
looked at a key
earlier, and there are more cuts, and they don't seem to match up to
what XX2247 would suggest.
Patrick is correct -- there appear to be 7 cut positions, one of which
is actually uncut.
Looking down the barrel of the key with the tab in the 12:00 position,
and reading clockwise, I measure approximately 0.8", 0.0", 0.11",
0.44",
0.11", 0.8", and 0.11".
Actually, rechecking this with the 10x magnifier and reticle (more
accurate) gives right at 1mm, 2mm, and 2.6mm for the 3 depths
of cut. (That's 39, 79, and 102 mils).
Vince