3 Dec
2016
3 Dec
'16
2 p.m.
Glen,
Are you sure it's the HP 82161 drive that's for the 82176A mini cassette and not
the DC100 tapes.
If it's the DC100 tape, it may be possible to read it with a HP-85 or an 9877A tape
drive.
It depends on the tape format if the tapes are readable on other systems.
-Rik
-----Oorspronkelijk bericht-----
Van: cctalk [mailto:cctalk-bounces at classiccmp.org] Namens Glen Slick
Verzonden: zaterdag 3 december 2016 22:43
Aan: General Discussion: On-Topic and Off-Topic Posts
Onderwerp: Re: HP1631D Logic Analyzer..Software???
On Sat, Dec 3, 2016 at 12:13 PM, Holm Tiffe <holm at freibergnet.de> wrote:
Hi folks,
I have an HP1631D Logic Analyzer for some years now und got an HP9121
dual Floppy drive that fits to it yesterday.
I've tested the drive, formating disks, storing and reading data ist
working :-) While reading the Users Manual of the LA I've found out
that besides of storing setup- and configuration data on the disk,
there should some loadable disassemblers for the HP1631D exist on
floppies..
The Logic Analyzer is very limited from todays point of view but for
example an Z80 disassembler where nice to have.
Has someone out here such disassemblers (Z180, 8085, 8080, 6809 etc)
for the HP1631D?
I have a 3.5-inch floppy part number 10342-13012 for the 10342B Bus
Preprocessor (HP-IB, RS-232C/V.24, RS-449) for HP1630A/D/G and 1631A/D
logic analyzers. I'll have to create an ImageDisk dump of that floppy.
I also have a tape somewhere if I can find it that is probably for the either the
6800/6802 10307B (64672B) or 6809/6809E 10308B (64671A) preprocessor if I
remember correctly. I don't have an 82161A HP-IL tape drive to try to read and
dump that tape. If I find that tape I should send it to someone with a working
82161A HP-IL tape drive and the means to dump and archive that tape.