9 Apr
2018
9 Apr
'18
12:59 p.m.
On Sun, 8 Apr 2018, Fred Cisin via cctalk wrote:
All the P112 boards I distributed use a FDC37C665IR super-IO chip from
SMC. I don't know which variant David Brooks used. I never acquired one
made by him. In case anyone wants more P112s, it's that chip that's the
big sticking point for why I don't have anymore. The board stuffer's
robots had problems dealing with pulls. The legs had to be absolutely
perfect, so I had to get new-old-stock chips. I've recently discovered
how to do a good job of soldering QFPs by hand, so maybe I could work that
angle.
The weirdness of the how the floppy drive cabling works with the P112 had
me baffled for the longest time. Terry and I thought it would be best
though to just leave those quirks alone when it came time to update the
firmware.
--
David Griffith
dave at 661.org
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
> Should be
fun.
> Is the FDC a 765 variant?
> or a WD 179x variant?
On Sun, 8 Apr 2018, Bill Gunshannon via cctalk wrote:
SMC 37C651.? Supports? 500 Kb/s, 300 Kb/s and 250
Kb/s Data Rates.
Something else we lost with the PC.
That's a 765 variant. Made by several companies, even WD!
Most of those can handle FM/"single density".
5.25" single density is 125K bps
It might support it,> Should have left it the way it was and have people set
the Drive Select
themselves.
in spite of not mentioning it.