4 Oct
2001
4 Oct
'01
2:29 p.m.
Does any one have the source code to Xinu for the Z80 (prefered) or the 68K?
I'm working on Circuit Cellar's HCS II (10 in Jan a now Open Sorce :-)
and I'd like to take advantage of Xinu and Zilog's newer Z80 derivatives.
Thanks
--
Linux Home Automation Neil Cherry ncherry(a)home.net
http://members.home.net/ncherry (Text only)
http://linuxha.sourceforge.net/ (SourceForge)
http://hcs.sourceforge.net/ (HCS II)
4 Oct
4 Oct
4:25 p.m.
Neil,
There are numerous versions of Xinu (v6-v8) and there are a number of
target processors. The matrix of the two are not complete, but I have
some of them. The earlier versions do not have full network support,
but the later ones do. I have an early 68k version and some later x86
versions. There are also pdp11 versions. Let me know what you are
looking for.
--tom
At 10:29 PM 10/4/01 -0400, you wrote:
Does any one have the source code to Xinu for the Z80
(prefered) or the 68K?
I'm working on Circuit Cellar's HCS II (10 in Jan a now Open Sorce :-)
and I'd like to take advantage of Xinu and Zilog's newer Z80 derivatives.
Thanks
--
Linux Home Automation Neil Cherry ncherry(a)home.net
http://members.home.net/ncherry (Text only)
http://linuxha.sourceforge.net/ (SourceForge)
http://hcs.sourceforge.net/ (HCS II)
5 Oct
5 Oct
1:25 a.m.
Tom Uban wrote:
Neil,
There are numerous versions of Xinu (v6-v8) and there are a number of
target processors. The matrix of the two are not complete, but I have
some of them. The earlier versions do not have full network support,
but the later ones do. I have an early 68k version and some later x86
versions. There are also pdp11 versions. Let me know what you are
looking for.
So far I've grabbed a PC version, a 8096 version, a TI-92 version and
a Dec Station 3100. I'd love to see the 68K version (but not the Sun
version) and really need the Z80 version. It doesn't matter if it has
the networking. Thanks
--
Linux Home Automation Neil Cherry ncherry(a)home.net
http://members.home.net/ncherry (Text only)
http://linuxha.sourceforge.net/ (SourceForge)
http://hcs.sourceforge.net/ (HCS II)
4:19 a.m.
If you're not wedded to Xinu, you might want to check out UZI, a Z80 port
of Unix v7. As of a couple years ago there was active development of the
Z280 version (UZI280) and the MSX version (USIX), both of which supported
memory management hardware.
Eric
8792
days inactive
8793
days old
3 comments
3 participants
participants (3)
-
korpela＠ssl.berkeley.edu -
ncherry＠home.com -
uban＠ubanproductions.com