20 Jun
2009
20 Jun
'09
6:21 p.m.
On Sat, June 20, 2009 7:27 am, Christian Corti wrote:
On Fri, 19 Jun 2009, Mr Ian Primus wrote:
XT controllers do. But now I recall that Ian said "WD1003" and I seem
to recall that that's the AT controller series. I think I remember
using an "IBM Advancced Diagnostics" floppy, or something like that, for
this.
-Dave
--
Dave McGuire
Port Charlotte, FL
Now, here's the dilemma. The stock card
won't respond to the usual debug
commands - they just freeze the computer. The original 20mb 3 1/2"
Normal MFM controllers never come with an own BIOS, so there's nothing to
jump to. 
20 Jun
20 Jun
8:41 p.m.
On 20 Jun 2009 at 12:21, Dave McGuire wrote:
XT controllers do. But now I recall that Ian said
"WD1003" and I
seem
to recall that that's the AT controller series. I think I remember
using an "IBM Advancced Diagnostics" floppy, or something like that,
for this.
There are lots of third-party low-level formatters--and later, many
included in the BIOS setup screen. Basically, they just make INT 13H
BIOS calls to format a track at a time.
Landmark PC Probe is a good interleave-tester and formatter in my
experience.
--Chuck
21 Jun
21 Jun
3:38 p.m.
----------------------------------------
From: cclist at sydex.com
To: cctalk at classiccmp.org
Date: Sat, 20 Jun 2009 11:41:19 -0700
Subject: Re: ISA MFM disk controllers
On 20 Jun 2009 at 12:21, Dave McGuire wrote:
Hi
It is not really too hard to write ones own format code
at the port level. I used a XT board on a machine that
didn't have a 8088 or x86.
It wasn't that much to write. The controller does most
of the work.
Dwight
_________________________________________________________________
Hotmail? has ever-growing storage! Don?t worry about storage limits.
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=TXT_TAGLM_WL_HM_Tutori…
XT controllers do. But now I recall that Ian said
"WD1003" and I
seem
to recall that that's the AT controller series. I think I remember
using an "IBM Advancced Diagnostics" floppy, or something like that,
for this.
There are lots of third-party low-level formatters--and later, many
included in the BIOS setup screen. Basically, they just make INT 13H
BIOS calls to format a track at a time.
Landmark PC Probe is a good interleave-tester and formatter in my
experience.
--Chuck
5810
days inactive
5811
days old
2 comments
3 participants
participants (3)
-
cclist＠sydex.com -
dkelvey＠hotmail.com -
mcguire＠neurotica.com