10 Feb
2002
10 Feb
'02
9:43 a.m.
This weekend's haul still doesn't top some of the $5 boxes I've bought
from other local spots, but it seemed like a good
enough haul to mention.
So without further delay...
25 data books and 3 computer books for $5
20 assorted twist-lock plugs and receptacles
[many are available for trade, see my earlier email]
2 12ft. mac serial cables
1 'AT&T 353A3' cable with a BNC and a RJ45 connector
1 'modem' cable for a custom application, 25-30ft. 9/25 pin
4 14 pin dip IDC ribbon headers
1 25 pin gender changer
2 pkgs sip resistor networks
1 pkg 6 50 pin IDC ribbon cable connectors
3 assorted pc boards
- misc assorted components and parts in the bottom of the box
1 Glenmarc Portion-Aire PV-200VP pneumatic actuated fluid dispenser controller
Each of the above items excluding assorted stuff and the books cost me
$0.50ea for a grand total of $18 plus $5 for the books.
Strangely enough, I purchased the foot switch for the Glenmarc unit from
the same shop about 6 months ago for $4 or so. Does anyone know much about
that unit? I don't have the handpieces for it, but they seem to still be
available from the manufacturer.
-Toth
10 Feb
10 Feb
1:32 p.m.
On Sun, 10 Feb 2002, Tothwolf wrote:
This weekend's haul still doesn't top some of
the $5 boxes I've bought
from other local spots, but it seemed like a good enough haul to mention.
So without further delay...
25 data books and 3 computer books for $5
20 assorted twist-lock plugs and receptacles
[many are available for trade, see my earlier email]
2 12ft. mac serial cables
1 'AT&T 353A3' cable with a BNC and a RJ45 connector
1 'modem' cable for a custom application, 25-30ft. 9/25 pin
4 14 pin dip IDC ribbon headers
1 25 pin gender changer
M-M or F-F? It helps to know.
- don
2 pkgs sip resistor networks
1 pkg 6 50 pin IDC ribbon cable connectors
3 assorted pc boards
- misc assorted components and parts in the bottom of the box
1 Glenmarc Portion-Aire PV-200VP pneumatic actuated fluid dispenser controller
Each of the above items excluding assorted stuff and the books cost me
$0.50ea for a grand total of $18 plus $5 for the books.
Strangely enough, I purchased the foot switch for the Glenmarc unit from
the same shop about 6 months ago for $4 or so. Does anyone know much about
that unit? I don't have the handpieces for it, but they seem to still be
available from the manufacturer.
-Toth
2:49 p.m.
On Sun, 10 Feb 2002, Don Maslin wrote:
On Sun, 10 Feb 2002, Tothwolf wrote:
Hehe, didn't think anyone would care about it. It's M-M IIRC, I'd have to
look out on the bench to be sure. I see em all the time here locally, and
just happened to grab that one. I figured it was worth $0.50, since I
needed one awhile back and couldn't find one. A few weeks later, I found
my stash of those things...
Any ideas as to what the 353A3 cable might be for? It has an 8 wire cable,
but in the only uses 2 of the conductors. It has a small coil in a plastic
box behind the BNC connector. It reminds me of the converters used for
certain terminal applications, but I've never seen an AT&T brand terminal.
The Glenmarc fluid dispenser is quite a find for $0.50 I think too.
Especially since I know what it is now ;)
-Toth
This weekend's haul still doesn't top
some of the $5 boxes I've bought
from other local spots, but it seemed like a good enough haul to mention.
So without further delay...
25 data books and 3 computer books for $5
20 assorted twist-lock plugs and receptacles
[many are available for trade, see my earlier email]
2 12ft. mac serial cables
1 'AT&T 353A3' cable with a BNC and a RJ45 connector
1 'modem' cable for a custom application, 25-30ft. 9/25 pin
4 14 pin dip IDC ribbon headers
1 25 pin gender changer
M-M or F-F? It helps to know.
8948
days inactive
8948
days old
2 comments
2 participants
participants (2)
-
donm＠cts.com -
tothwolf＠concentric.net