Paul, For Tiny BASIC for the Heathkit ET(A)-3400, pertinent manuals; 595 - 2021 -06 Microprocessor Trainer Model ET- 3400 595 - 2070 -01 Memory I/O Accessory Model ETA- 3400 595 - 2070 -01 Software Reference Manual Model ETA- 3400 The Trainer Manual has the schematic, assembly and operations for the trainer. The Memory I/O has the schematic, hardware mods and operation for the two boxes. The Software Reference is the Holy Grail. It has everything you need to actually RUN the Tiny BASIC on the ET-3400. Without this book, you're screwed. You have to launch the Tiny BASIC from the Wintek Monitor program manuals for $5 each. Heathkit is still around (as an Educational Company only) but they still sell manuals. Good luck with your project ! Best regards, Steven ----- Original Message ----- From: "Bob Applegate" <bob(a)applegate.org> To: <cctech(a)classiccmp.org> Sent: Friday, June 04, 2004 4:20 PM Subject: Looking for Pittman's Tiny Basic Tom offered to send me a paper tape if I could read it. I asked on this list and got a lot of offers to help... thanks to everyone who wanted to help! Today I got email from Tom again. He moved several years ago, and just went to look for the tapes. The box labeled TINY BASIC had paper tapes, but not for Tiny. He's optimistic that he might still have the original tapes somewhere and he plans on looking for them. The only version he found so far has been for the 1802. In the mean time, if anyone on the list has any version of Tom's TB, he might appreciate getting copies, even if it's just the binaries. I'm desperately seeking the 6502 version, so hopefully someone can get a copy to Tom. He must have sold quite a few copies, considering they were originally $5 each ($5 for software? Amazing!). Hopefully someone has some old copies laying around. Bob