Microvax II hardware not recognized

Jerry Weiss jsw at ieee.org
Sat Aug 20 21:35:12 CDT 2016

> On Aug 20, 2016, at 10:27 AM, Douglas Taylor <dj.taylor4 at comcast.net> wrote:
> When I started this I hadn't put the RQDX2 back in, so I had only one UDA controller and that's how I saw the DHV11 show up.  When I put the RQDX2 back in that's when I lost the DHV11.
> I did the configure from VMS 5.5, it was a lot less verbose than what you showed.
> At this point I am wondering why I am fussing over such useless interchange medium as the RX50 diskettes and the TK50 tape cassettes.  Of course to the hobbyist the answer is "Because they are there!" and you better get them working.  I would be better off with a DELQA, BTW will the cabinet kit from a DEQNA work with the DELQA?

Yes, I’ve used a cabinet kit from a DEQNA on a DELQA using 11/73’s.

In the Microsystem Options http://vaxhaven.com/images/1/16/EK-192AA-MG-001.pdf <http://vaxhaven.com/images/1/16/EK-192AA-MG-001.pdf>  it appears the cable set is the same for both.


More information about the cctalk mailing list