IBM 4331 Mainframe
dkelvey at hotmail.com
Mon May 1 11:53:51 CDT 2017
Aren't these water cooled?
I seem to remember hoses.
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Dave Wade G4UGM via cctalk <cctalk at classiccmp.org>
Sent: Monday, May 1, 2017 9:48:52 AM
To: 'Guy Sotomayor Jr'; 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: IBM 4331 Mainframe
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Guy
> Sotomayor Jr via cctalk
> Sent: 01 May 2017 05:39
> To: General Discussion: On-Topic and Off-Topic Posts
> <cctalk at classiccmp.org>
> Subject: IBM 4331 Mainframe
> Just to let folks know that I finally moved the IBM 4331 Mainframe this past
> weekend from where it was currently stored to my shop. Pictures are here:
> As can be seen in the pictures, it filled a 26’ box truck that I had rented for
> this purpose.
> Right now I just have it placed somewhat in my shop. Some early tasks will
> * I have to verify that I have everything. Even if I missed some items, they
> won’t be
> scrapped. I just need to go over what is currently in my shop and verify
> that I didn’t
> leave anything behind. I’m mostly worried about cables at this point.
> * I have to figure out some way to produce enough “clean” 3-phase power
> to run the
> peripherals (the CPU is 220v single phase) as I only have 220v single phase
> into my shop.
> Starting to power it up will probably be a while yet. ;-)
Yes I remember having a gentle discussion with the University of Salford electricians, who wanted to know why I wanted 2 x 100amp feeds for the room into which the 4361 (I think it was a 4361, might have been a 4331 or 4341) was placed. I don't think we ever loaded them at 100amps but that was what IBM required. One was for the AirCon and the other for the CPU. If I remember properly those disks are the truculent ones. Assuming you have AirCon they need to sit for several hours to acclimatise.
> TTFN - Guy
More information about the cctalk