August 2023 - cctalk - classiccmp.org

NGPL TCS - 1969 Industrial Control

by Eric Moore

https://youtu.be/-CaUafVqnbw Super stoked to be able to share my latest video, I hope yall like it. -Eric

3 years

5
6
0 0

SunPC

by silcreval

Hi there I recently had a mad hankering to add a SunPC card to my Sparcstation. A lot of you will be familiar with the SBUS cards with a 486 or '586' processor. Does anyone have one spare they would like to part with? Please PM me if you do. Anything really not at all fussed. This sort of re-creates a setup I had as a post graduate when I had a new 486DX2 alongside a Sparcstation 2, or at least had access to them. Both were pretty amazing machines at the time. I do remember benchmarking these two machines running similar C software I'd compiled up (a simple electromagnetic simulator), and it was noticeable that the sparcstation was at least twice as fast.

3 years, 1 month

1
0
0 0

Logic Analyzers - HP/Agilent 16700B or 1670G?

by John H. Reinhardt

Hello all. I looking around for a Logic Analyzer for doing (mostly) DEC QBus/UniBus stuff. Being the way I am I want something with enough lines to handle the most of the signals so I'm guessing something with roughly 80-ish channels. I think that lets out all/most of the USB based LA. I've looked around and it seems the the HP/Agilent 16700 series (16700B/16702B) are probably what I want. I've also seen the 1670G which also seems quite doable. I've seen a lot of posts at the EEVblog and it seems I missed possibly the golden age of 16700 LA by a few years price-wise. What I'm wondering is if there is something specific I should be looking for, or opinions on which LA is more suitable. Or even if there is a different make of LA to look for. Thanks in advance for your help John H. Reinhardt

3 years, 1 month

14
21
0 0

Dec Vax in Simh - VMS Operating system

by devin davison

Hello All, I am working to get my two microvax systems working, I have a couple of microvax 3800 systems. While I am waiting to get the real hardware going, I would like to set up simh with vms to use for testing. I don't really need the latest version of vms, any old version with tcp/ip would work. I do have about 16 dumb terminals i want to run as a lab and connect to the vax. Can anyone provide guidance on this matter for setting up and install of VMS in sinh? I realize that there was the openvms hobbyist program, but i may want to grab an older version of the os if it will run smoother on the older hardware. Open to suggestions, I hope to post back with some pictures once the real vax 3800 hardware is running. Thanks, Devin D.

3 years, 1 month

3
2
0 0

Divestiture and sqlite3

by Adam Thornton

To clarify a couple of things in response to queries: my time for divestment is "not yet"--but rest assured, when it arrives, I will certainly see who wants things from my assortment (don't get too excited; there's nothing super-rare or valuable in it, and I've always been more concerned with restoring functionality than maintaining period-correctness; I am one of those collectors who restores stuff to play with it, not to then put it in shrinkwrap and preserve it for some uncertain future). And should that time arrive suddenly, well, argh, I've been putting off making a will too long, but I know who I'm going to put in charge of "everything computery," and I trust her to make good decisions about the things she doesn't want. My understanding of sqlite (and it could be wrong) is that concurrent writes aren't supported, and reads should block if a write is in progress until the write completes. In practice it seems like most things are one-sqlite-file-per-process and if that process is threaded, one would hope the programmer understands what they're doing well enough to make it work. There are fairly few cases I've seen where a single sqlite file is shared between unrelated processes, which would take filesystem locking working correctly to ensure correctness. Which is generally OK for local filesystems, but NFS is still a bucket of worms when it comes to locking behavior, and the number of people running systems that genuinely understand NFS has been declining for decades. (I do not count myself among those people.)

3 years, 1 month

2
1
0 0

Connecting MFM emulator as both 1st and 2nd drive in Microvax 2000?

by Jonathan Stone

I have a Gesswein MFM emulator from decromancer.ca; who offer an adaptor that yields a 2nd MFM data connector. I'll use mine in a Microvax 2000. Does anyone know how to hook it up as two MFM drives in a Microvax 2000? The vendor sold a 1in high adaptor box, BA40A, with DD50 connectors to a second cabinet (same as CPU box) for a second drive. DEC configured both primary and secondary drives identically (drive 3, IIRC). The Microvax 2000 Technical Manual gives the pinout from the mother board to the MFM/floppy daughterboard, but I can't find the pinout from that daughterboard to the cables anywhere. I've been looking for a BA40A, for some years now, to trace the pin layout for a 2nd drive. Does anyone know it? Has anyone successfully configured a single MFM emulator as two MFM drives in a Microvax 2000? Or to an RQDX3?

3 years, 1 month

25
51
0 0

Disposition of stuff

by Adam Thornton

Been thinking about it a little recently, and, no, I definitely don't plan to send my stuff to a scrapper. I have some younger friends with an interest in retrocomputing. They want my stuff when I'm done with it, sure. And if they want _just a little_ of my stuff I'll probably strike a deal like, "you can have the SGI Indy if that box of IDE drives goes with it, and you aren't allowed to throw it away until you're somewhere I'm not going to see it by the side of the road." Adam

3 years, 1 month

4
3
0 0

Re: Disposition of stuff

by dave.g4ugm＠gmail.com

Mike, Well sadly I have no PDP-8 parts. I do have a few bits of Q-BUS PDP-11. Probably enough to build a complete 11. I am also in the UK …. Dave From: Mike Katz <bitwiz(a)12bitsbest.com> Sent: Saturday, August 19, 2023 3:53 PM Cc: 'KenUnix' <ken.unix.guy(a)gmail.com>; dave.g4ugm(a)gmail.com Subject: Re: [cctalk] Re: Disposition of stuff I will gladly give a nice warm loving home to any PDP-8 equipment and parts that you have. On Aug 19, 2023 6:16 AM, Dave Wade G4UGM via cctalk <cctalk(a)classiccmp.org <mailto:cctalk@classiccmp.org> > wrote: Gentles, The problem is I have stuff no one wants. Large plotter, dec writer in need of repair, Large Alpha server.... Suggestions? Dave > -----Original Message----- > From: KenUnix via cctalk <cctalk(a)classiccmp.org <mailto:cctalk@classiccmp.org> > > Sent: Saturday, August 19, 2023 10:14 AM > To: General Discussion: On-Topic and Off-Topic Posts <cctalk(a)classiccmp.org <mailto:cctalk@classiccmp.org> > > Cc: KenUnix <ken.unix.guy(a)gmail.com <mailto:ken.unix.guy@gmail.com> > > Subject: [cctalk] Re: Disposition of stuff > > Adam, > > I agree. Give it a new home. Save computing history because when it's gone it's > gone. > > Ken > > On Fri, Aug 18, 2023 at 10:02 PM Adam Thornton via cctalk < > cctalk(a)classiccmp.org <mailto:cctalk@classiccmp.org> > wrote: > > > Been thinking about it a little recently, and, no, I definitely don't > > plan to send my stuff to a scrapper. I have some younger friends with > > an interest in retrocomputing. They want my stuff when I'm done with > > it, sure. And if they want _just a little_ of my stuff I'll probably > > strike a deal like, "you can have the SGI Indy if that box of IDE > > drives goes with it, and you aren't allowed to throw it away until > > you're somewhere I'm not going to see it by the side of the road." > > > > Adam > > > > > -- > End of line > JOB TERMINATED

3 years, 1 month

1
0
0 0

Nixies..

by Holm Tiffe

...only for a look.. https://www.daliborfarny.com/project/h-nixie-tube/ I'm not related with that czech factory, this is no advertising. Regards, Holm -- Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, Goethestrasse 15, 09569 Oederan, USt-Id: DE253710583 info(a)tsht.de Tel +49 37292 709778 Mobil: 0172 8790 741

3 years, 1 month

4
6
0 0

Good Inventory Program

by Evan Linwood

This is almost an impossible question to answer (!) but it might be worth mentioning Pimcore. This is an open source master data management tool, meaning that it supports both schema (data model) design and generation/design of UI elements via a reasonably decent management interface. It might even be overkill for this particular use case., but from memory the web UIs that it generates don’t depend on front end libraries / Angular / React etc & so may work with older browsers. Perhaps another option is LibreOffice Base?

3 years, 1 month

4
3
0 0

2026

2025

2024

2023

2022

cctalk August 2023