April 2026 - cctalk - classiccmp.org

by Jim Bender

Does anybody here still use Massbus? Or have a Massbus system you’d like to run, but the idea of dealing with washing-machine disk drives is a bit less appealing these days? In what may classified as a momentary lapse of reason, I have taken up the old Living Computer Museum Massbus emulator project and am in the process of resurrecting / modernizing it. Current progress photo here: http://www.dmv.net/mbe/mbe1.jpg Why, you ask? "Has he gone insane?" are you thinking? I have three PDP-11/70s that I would like to get running again. Sure, I could cheat and hang a UNIBUS SCSI controller with a ZuluSCSI disk simulator, but where is the fun in that? Also, the 11/70 was designed and optimized around Massbus for primary storage, so it seems only fitting to use it that way. The original LCM emulator used a PC with a Mesa 5I22 FPGA card as the Massbus interface. The FPGA implemented the drive-side bus logic, while the PC software emulated the backing disk or tape image. A driver/receiver (“D/R”) board sat in the middle to translate the Massbus differential signals into logic levels suitable for the FPGA. It worked... Since Mesa 5I22 cards are now pretty much unobtainium, I went looking for a cleaner and more modern approach. The result is a redesigned D/R board that accepts a Terasic DE10-Nano directly. The DE10-Nano is a small Linux SBC with a Cyclone V FPGA onboard, so it can host the emulator software itself while the FPGA handles the Massbus interface duties that were previously done by the Xilinx FPGA on the Mesa card. Same general architecture, but much tidier. There is still work to do, but it is coming along nicely. The board in the photo is not yet fully populated, since I am doing incremental testing before committing the rest of the parts. As I have gone down this rabbit hole, naturally a few questions in the “why did they do THAT??” category have come up... paging @Rich Alderson ... If anyone here is still actively using Massbus, has experience with the original LCM project, or just has relevant war stories, comments, warnings, or encouragement, I would be glad to hear them. Cheers! Jim

4 weeks, 1 day

17
23
1 0

VCF West 2026 Registration is open!

by Jeffrey Brace

VCF West 2026 will be held on August 1st and 2nd at the Computer History Museum in Mountain View, CA. We have opened registration for exhibits, vendors, speakers, and volunteers. Please visit our event application at https://em.vcfed.org/events/vcf-west-2026 to register. Also, please note that this software is new, so there may be a bug or two. Please report any issues, or send any questions or comments to vcfwest(a)vcfed.org. Thank you! Jeff Brace VCF West co-showrunner

1 month

2
2
0 0

Re: Why do we do these things? (was: Massbus emulation)

by Kevin McQuiggin

It is nice to get back to these old programs. A few years ago I fixed a bug in an undergrad chess “knight’s tour” program I wrote when I was about 18. It was written in PL/I. Last edit: 1978; I happily added “bug fix, 2016”. I knew of the bug, just never got around to fixing it. I added some printout improvements too. I had the Hercules S/360 emulator running. MVS 3.7j I recall. Memory lane trip for sure. JCL? Had to find my “green book”! Kevin Sent from my iPhone > On Apr 24, 2026, at 12:34, Paul Koning via cctalk <cctalk(a)classiccmp.org> wrote: > > > >> On Apr 24, 2026, at 3:26 PM, Brian L. Stuart via cctalk <cctalk(a)classiccmp.org> wrote: >> >> Very cool. A while back, I resurrected one of my senior >> projects from 1984, a little Forth-based OS for the PDP-11. >> It was originally implemented on an 11/34 with an RK05, >> but now I've got it on a little LSI-11 in a BA11-VA box >> with a little 6809 board I build and wrote a TU58 emulator >> for. > > I recently started playing a lot more with Forth. The main reason is that I ran into a very nice extended Forth system for the Raspberry Pico, which makes for a much nicer development environment than the vendor-supplied C API. It's a bare metal system, implemented mostly in Forth with the low level bits in assembly language. No C or C++ anywhere. > > https://github.com/tabemann/zeptoforth > > It does networking, too. I've been using it to develop a nice NTP server (and disciplined oscillator), very nice and small. > > paul >

1 month, 1 week

1
0
0 0

Re: Massbus emulation

by Mark Kahrs

At LSSM, we have 2 KS10s and 1 11/70. We have one of the LCM emulators connected to a KS10, but alas, both KS10 power supplies are now deceased, so we are working on replacements. The emulator seems to work fine, for as much as we've used it. Of course, the Massbus connectors are made of unobtanium and must be scrounged from elsewhere.

1 month, 1 week

1
0
0 0

VCF East 2026 Post Event Surveys

by Jeffrey Brace

VCF East was quite successful in many ways. Please take a few minutes by answering this anonymous survey: https://www.surveymonkey.com/r/97RMZSJ

1 month, 1 week

1
0
0 0

Ken and Roberta Williams at VCF East (virtually), Wall, NJ April 18, 11AM

by Jeffrey Brace

Ken and Roberta Williams of Sierra Online will appear virtually at VCF East 2026, Saturday, April 18 at 11AM. After a 10 minute introduction, they will take questions from the in-person audience. For tickets to VCF East: https://events.humanitix.com/vcfeast2026?c=cctalk For info: https://whova.com/web/GHMfP%40%40JlCnOF3xlEWLmBBm1POMpM3REEcBH%40BfF1SA%3D/ Take care! Jeff Brace VCF East Showrunner

1 month, 3 weeks

4
3
0 0

Re: Kodak Diconix 150plus - looking for info

by Sunil Vadgama

Hello Sir, I have this printer with Parallel Centronics connection. How do I print something using modern pc? Thanks for information on power connection, great help. Thanks Sunil

1 month, 3 weeks

4
3
0 0

Bill Mensch will talk at VCF East on April 18 at 5PM in Wall, NJ.

by Jeffrey Brace

Co-inventor of the MOS 6502 microprocessor. He will talk about what he did after leaving MOS Technology Corp. TICKETS: https://events.humanitix.com/vcfeast2026?c=cctalk INFO: https://whova.com/web/GHMfP%40%40JlCnOF3xlEWLmBBm1POMpM3REEcBH%40BfF1SA%3D/

1 month, 3 weeks

1
0
0 0

M9301-YA.mac

by Roman Petrov

Dear Noel, Thank you very much for making the M9301-YA.mac file publicly available (https://www.classiccmp.org/pipermail/cctalk/2015-April/006241.html), but I can't download it... When I try to download it, I get the message: "You don't have permission to access /~jnc/tech/pdp11/M9301-YA.mac on this server." Could you please email me the M9301-YA.mac file archive? With best wishes Roman

1 month, 3 weeks

2
1
0 0

Lee Felsenstein talk at VCF East on April 19 at 3PM in Wall, NJ

by Jeffrey Brace

Meet Lee Felsenstein will talk at VCF East on April 19 at 3PM in Wall, NJ. A central figure of the legendary Homebrew Computer Club. He is best known for The Osborne 1, The Sol-20, Community Memory. Don't miss the chance to hear from a pioneer who didn't just build the tools, but changed the rules. TICKETS: https://events.humanitix.com/vcfeast2026?c=cctalk INFO: https://whova.com/web/GHMfP%40%40JlCnOF3xlEWLmBBm1POMpM3REEcBH%40BfF1SA%3D/ Take care! Jeff Brace VCF East Showrunner

1 month, 3 weeks

2
2
0 0

2026

2025

2024

2023

2022

cctalk April 2026