[cctalk] SLIP TCP/IP stack for PRO/VENIX

Way back when, I asked on the list about null modems for the DEC Pro which I planned to use for experiments with SLIP. PRO/VENIX doesn't have any network capability other than UUCP, and it doesn't seem like anything else supports the Ethernet CTI card other than P/OS (of course) and the unofficial 2.9BSD, but I like PRO/VENIX V2.0 better because it's a real System V. Anyway, here's a simple implementation with four clients (ping, DNS, NTP and command-reply TCP) which runs over the printer port at the standard 4800bps. That keeps the main serial port free as a second terminal and for Kermit. Getting it to work with both the PRO/VENIX Rev. 2.0 and V2.0 compilers (i.e., older-than-V7 and System V respectively) was interesting. Unfortunately Xhomer's serial port emulation isn't good enough for this yet; many dropped bytes. It works fine with my real DEC Pro 380. https://oldvcr.blogspot.com/2025/04/lets-give-provenix-barely-adequate-pre.… https://github.com/classilla/bass -- ------------------------------------ personal: http://www.cameronkaiser.com/ -- Cameron Kaiser * Floodgap Systems * www.floodgap.com * ckaiser(a)floodgap.com -- God made the integers; all else is the work of Man. -- Kronecker -----------