23 Mar
2025
23 Mar
'25
2:50 p.m.
Curious if there's anything in the community on them
They made a cpm based system that was used in HMI control room settings in
the 80's I've got the manuals for their pdm 800 series along with backup of
the software on 8in floppy from the mclelan mine in Lynn lake mb. Love to
find a system the one that went with my stuff got bulldozed into the ground
in 2009
23 Mar
23 Mar
4:59 p.m.
I assume “DPM” is Drive Positioning Module”?
Sent from my iPhone
On Mar 23, 2025, at 14:50, Adrian Stoness via cctalk
<cctalk(a)classiccmp.org> wrote:
Curious if there's anything in the community on them
They made a cpm based system that was used in HMI control room settings in
the 80's I've got the manuals for their pdm 800 series along with backup of
the software on 8in floppy from the mclelan mine in Lynn lake mb. Love to
find a system the one that went with my stuff got bulldozed into the ground
in 2009
5:02 p.m.
Dpm?
On Sun, Mar 23, 2025, 6:59 PM Wayne S <wayne.sudol(a)hotmail.com> wrote:
I assume “DPM” is Drive Positioning Module”?
Sent from my iPhone
On Mar 23, 2025, at 14:50, Adrian Stoness via
cctalk <
cctalk(a)classiccmp.org> wrote:
Curious if there's anything in the community on them
They made a cpm based system that was used in HMI control room settings
in
the 80's I've got the manuals for their
pdm 800 series along with backup
of
the software on 8in floppy from the mclelan mine
in Lynn lake mb. Love to
find a system the one that went with my stuff got bulldozed into the
ground
in 2009
5:39 p.m.
Sorry. PDM as in PDM 800 series.
Was just gonna say that,if so, it’s probably a one-off system that was specified by the
Mine Company and custom programmed by Westhead.
Hardware is probably off the shelf pc with interfaces to Opto22 type controllers. Could
also be Allen-Bradley or Siemens controllers too.
Sent from my iPhone
On Mar 23, 2025, at 17:02, Adrian Stoness <tdk.knight(a)gmail.com> wrote:
Dpm?
On Sun, Mar 23, 2025, 6:59 PM Wayne S
<wayne.sudol@hotmail.com<mailto:wayne.sudol@hotmail.com>> wrote:
I assume “DPM” is Drive Positioning Module”?
Sent from my iPhone
On Mar 23, 2025, at 14:50, Adrian Stoness via cctalk
<cctalk@classiccmp.org<mailto:cctalk@classiccmp.org>> wrote:
Curious if there's anything in the community on them
They made a cpm based system that was used in HMI control room settings in
the 80's I've got the manuals for their pdm 800 series along with backup of
the software on 8in floppy from the mclelan mine in Lynn lake mb. Love to
find a system the one that went with my stuff got bulldozed into the ground
in 2009
95
days inactive
96
days old
3 comments
2 participants
participants (2)
-
Adrian Stoness -
Wayne S