1 Aug
2022
1 Aug
'22
2:29 a.m.
Hi,
What is the "correct" name for the style (technology?) of circuit board
layout images where the top is blue, the bottom is red and overlaps are
purple? Also, any silkscreen is black. I thought someone once told me that
there was an automated tool (maybe in KiCad?) that would produce Gerbers
from that type of image. Does anyone know of such a utility?
Thanks,
Bill S.
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
1 Aug
1 Aug
4:03 a.m.
On 07/31/2022 7:29 PM CDT William Sudbrink via cctalk
<cctalk(a)classiccmp.org> wrote:
Hi,
What is the "correct" name for the style (technology?) of circuit board
layout images where the top is blue, the bottom is red and overlaps are
purple? Also, any silkscreen is black. I thought someone once told me that
there was an automated tool (maybe in KiCad?) that would produce Gerbers
from that type of image. Does anyone know of such a utility?
Thanks,
Bill S.
I originally sent this to the list, but it was rejected. So here it is again.
You can import a graphics file into kicad and create a footprint / component from it. I
have only used it to import an image to put onto the silkscreen so I don't know what
all it can do. I'm using kicad 5.1.9 and from the main (initial) window click Tools
-> Convert Image to bring up the image import tool.
HTH,
Will
P.S. I also found this link that may be of interest:
https://forum.kicad.info/t/copy-a-old-board-layout-into-kicad/26717/25
4:25 a.m.
When I was doing that kind of work in the 80's we called it "Taping out
a circuit board", each layer was laid out on large sheets of mylar
(usually 2 x or 4 x actual size) with each layer "Taped Out" with
different color mylar tape.
On 7/31/2022 9:03 PM, Will Cooke via cctalk wrote:
On 07/31/2022 7:29 PM CDT William Sudbrink via
cctalk <cctalk(a)classiccmp.org> wrote:
Hi,
What is the "correct" name for the style (technology?) of circuit board
layout images where the top is blue, the bottom is red and overlaps are
purple? Also, any silkscreen is black. I thought someone once told me that
there was an automated tool (maybe in KiCad?) that would produce Gerbers
from that type of image. Does anyone know of such a utility?
Thanks,
Bill S.
I originally sent this to the list, but it was rejected. So here it is again.
You can import a graphics file into kicad and create a footprint / component from it. I
have only used it to import an image to put onto the silkscreen so I don't know what
all it can do. I'm using kicad 5.1.9 and from the main (initial) window click Tools
-> Convert Image to bring up the image import tool.
HTH,
Will
P.S. I also found this link that may be of interest:
https://forum.kicad.info/t/copy-a-old-board-layout-into-kicad/26717/25
1015
days inactive
1015
days old
2 comments
3 participants
participants (3)
-
Mike Katz -
William Sudbrink -
wrcooke＠wrcooke.net