[cctalk] Re: Need Emulex QD21 help

OK, after my stupid error, I got another KA630-AA and put it in the right slot of the H9278-A backplane.  The uVAX goes through the power on self test, and drops into ODT.  I then do the procedure in the Emulex manual to load the diagnostic into VAX memory, but it doesn't work.  line 10 is E/P/W 2000146A and I am supposed to see 400, but I get a 200 instead and nothing changed at location 80. Is there any possibility there is an error in the manual?  (I have the very vague recollection that 40 years ago I couldn't get this to work, and plugged the QD21 into and LSI-11 system instead. Is there any jumper that would be needed for DMA (NPG) to work properly on a H9278A that was originally on an LSI-11 system for it to work on a uVAX-II? I am pretty much at a loss here.  I do have an MDB backplane that did work in my original system, but I had cobbled up my own DCOK and BUSINIT-L logic that never quite worked right.  I would have to resurrect all that to test with the MDB backplane.  (I no longer have the LSI-11.) Thanks, Jon