[cctalk] Re: Massbus emulation

My apologies, I made a mistake and don't have Joerg's qbone boards, just his qprobe. I do have his Unibone bare boards. I'd be happy to look into doing a run (and check on populating at least surface mount chips) but it probably doesn't make sense given Decromancer's qprobe dual. Todd On 4/25/2026 9:38 AM, Todd Goodman wrote: > > FWIW, I have Joerg's qbone and unibone bare boards (listed at my > inventory page at > https://wiki.bonedaddy.net/doku.php?id=boardinventory down under the > DEC boards section.) > > They're unpopulated.  They have "real" hard gold fingers.  They were > purchased in bulk before all the tariff increases (so lower price than > I could get them for now in the US) and I do this for a hobby so sell > at cost. > > Please email me directly if interested. > > Thanks, > > Todd > > On 4/24/2026 2:48 AM, Jim Bender via cctalk wrote: >> >> >> On 4/23/2026 2:10 PM, Chris Zach via cctalk wrote: >>> Jim: >>> >>>  I am planning to get a pair of Unibones >> >> I need a couple of Unibones for myself and I am planning to do a run >> of the >> boards with the surface mount components installed.  You would need >> to source >> the other parts, but that isn't too difficult (digikey, mouser, >> etc).  I don't >> really have the spare cycles to build complete boards for others, but if >> someone was very persuasive, maybe... >> >> If anybody wants one/some let me know and I can adjust the number of >> boards in >> the run.   Not sure at the moment how much the per-piece cost would >> be, but >> last time I checked it wasn't bad... less than importing from Europe, >> anyway. >> >> Jim