The A/C is in and running! Tomorrow and Sunday we reassemble the
exhibit floor and clean up the mess, just in time for the 60-person
group tour on Monday.
--
Dave McGuire, AK4HZ
New Kensington, PA
Thanks to all who contributed to the new A/C!
Yep.
And, it was not appreciated when I suggested an interim release between
the MT/ST emulator and "Full-ST" to be called "Half Full ST"
On Fri, 30 Jul 2021, grif615 at mindspring.com wrote:
> Scope Creep.. no telling how many projects died in stalled development.
>
> On Jul 30, 2021 16:36, Fred Cisin via cctalk <cctalk at classiccmp.org>
> wrote:
>
> On Fri, 30 Jul 2021, Chuck Guzis via cctalk wrote:
> > Not really--it's very old technology, (1964), of limited
> capacity (about
> > 20 KB per tape), was a hideously expensive way to buy a
> typewriter
> > (about USD$7000 in 1964, or about USD$61,000 today), used
> almost
> > exclusively in large corporate offices to create form
> letters and
> > documents. In other words, it was not intended as an
> archival medium.
> > The effort required in preparing a document was
> considerable (one used
> > the mini-keypad for various functions). For a memo, it was
> easiest to
> > use the typewriter as a typewriter.
> > There are more interesting things to look at.
>
> Well, form letters are "important".
> But, once microcomputer word processing matured, they could
> be done easily
> and much better.
>
> An acquaintance was working on creating an emulation of the
> MT/ST, as a
> way for those who were familiar with the MT/ST and/or
> actually liked it,
> to be able to continue unchanged on a microcomputer.
>
> But, then he started adding features. Besides delaying the
> completion
> until it was no longer relevant, it was suggested that he
> change the name
> from "MT/ST" (pronounced "empty ST") to "FULL ST".
I heard a rumor that VCF is going to happen again!
But, I have seen NO MENTION of that on this mailing list.
Is it happening?
Will everybody be there?
It is now relatively short notice, and between that, not having a station
wagon or van, and health issues, I won't be able to pack up and bring a
suitable mass of stuff to peddle on consignment.
--
Grumpy Ol' Fred cisin at xenosoft.com
Does anyone have the Windows (preferably Windows 10) drivers for the Lexar Media GS-UFD-20SA-TP PC card reader? I found a driver online, lexar_card_34806.zip at admirestore.top, but Malwarebytes gives a warning about the download site, so I am hesitant to download that driver. I want to get my old Lexar PC card reader working again so I can read some cards that I used with my Poqet PQ-181.
Bob
I'm running Linux Mint (an ubuntu derivative) and I want to mount ULTRIX
CDROM discs to see what I can see.
(I'm eventually going to image these, but I presume that will "just
work" with dd or ddrescue).
They are supposed to be UFS format (according to the net) and that
usually means you have to tell mount exactly which option to use (as not
all UFS implementations are compatible).
I've tried (all the options I can find) and failed:
$ sudo mount -t ufs? -o ufstype=44bsd /dev/sr1 /tmp/mount
mount: /tmp/mount: wrong fs type, bad option, bad superblock on
/dev/sr1, missing codepage or helper program, or other error.
The CDROM would appear to be readable 9and I've tried a few anyway):
$ sudo file -s /dev/sr1
/dev/sr1: Unix Fast File system [v1] (little-endian), last mounted on
/UPS_MOUNT_TAR_SOURCE, last written at Wed Sep 28 16:27:45 1994, clean
flag 30, number of blocks 243648, number of data blocks 233295, number
of cylinder groups 38, block size 8192, fragment size 1024, minimum
percentage of free blocks 10, rotational delay 0ms, disk rotational
speed 60rps, TIME optimization
A later Digital Unix CDROM behaves the same way with mount and reports
this with file:
$ sudo file -s /dev/sr1
/dev/sr1: Unix Fast File system [v1] (little-endian), last mounted on
/kits/tmp/gendisk17665/mnt, last written at Wed Nov 20 13:38:02 1996,
clean flag 3, number of blocks 151168, number of data blocks 150383,
number of cylinder groups 24, block size 8192, fragment size 1024,
minimum percentage of free blocks 0, rotational delay 0ms, disk
rotational speed 60rps, SPACE optimization
I also have a few OSF/1 CDROMs, which I assume are also the same format.
Any ideas? I can't be the first person to try to do this ...
Antonio
--
Antonio Carlini
antonio at acarlini.com
I found a copy of RP/M2 for the IBM PC by Micro Methods Inc. with manual
and some floppies, 8" and 5.25". According to the manual, this was a
CP/M compatible operating system. Doing a web search doesn't tell me
anything more than a couple offhand comments. Does anyone here know
anything interesting about this?
--
David Griffith
dave at 661.org
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
For a time I had quite a few Compaq Deskpro towers that had acquired (for free) from my employer after they updated to a newer HP Compaq model. These Compaq Deskpros were the white-boxed variety with Pentium III the like processors that date to the later part of the 1990s and into the 2000s. They interested me because they were able to work with the flavors of Linux that were becoming plentiful and useful at the time (like Mandrake, etc.) Anyway, the desktops themselves are gone, as well as the PC keyboards and the monitors that went with them, with this paragraph just setting the scene....
But at the same time I also acquired (pulled) from these same computers and their siblings a whole bunch of wired Ethernet network cards, one or two video cards, a whole bunch of the IDE/PATA 5.25-inch desktop CD drives, and a whole bunch(!) of 10- and 20-GByte IDE/PATA 5.25-inch desktop hard drives. I believe the vintage makes them all PCI cards for the network and video cards. For some reason I must have had it in my head that I would all need these extra cards (and more) to keep these boxes (and other desktops) going into the future when the apocalypse came <grin> !
Now I have no need for any of these parts. I don't want to chuck them to a recycler either, but it is tempting just to get the stuff out of the house (as I need to seriously downsize prior to retirement).
Is there a market for any of this that is worth pursing, or is this all too generic and plentiful to worry about? Giving shipping and that, I am not sure how much of this I'd care to deal with this through resale (eBay or privately) versus just dropping it all at the electronics recycling shop (which fortunately I have locally).
Just starting to sort this out...I've been meaning to send this e-mail for awhile now. Your collective thoughts? I know most of this is too new for most of your interests...
Kevin Anderson, Dubuque, Iowa
I wanted to take a moment to say thank you to everyone who has
contributed to the recent threads related to floppy disk capacity.
I have found the threads to be very insightful and have saved things off
for re-reading when I update my personal notes on the subject.
Thank you!
--
Grant. . . .
unix || die
Hi,
A plea, does anyone have a copy of OpenVMS Alpha V7.3-2? I have looked at all my archives and only have it for VAX. An upgrade would also work as I have V7.3.
If someone has a copy in VMS so-called ISO format that would be great.
Just got a Personal Workstation 500au fully working and would prefer to keep it on V7 VMS.
Many thanks, Mark