test-drb

test-drb@ccmp.vtda.org

101090 discussions

FTGH for pickup in So Cal v2: Macs, Atari ST, various hardware

by spectre＠floodgap.com

The PDP-11, VT100, Flyer/Video Toaster and some of the Macs have found homes, but there are still some items left and a couple more I added. These will be going to the recycler soon unless they are spoken for (all free to good homes). I may be adding some others, too. As before items are at various locations in Riverside-San Bernardino, CA. Please contact me OFFLIST to arrange PICKUP. POSSIBLY WORKING: Mega ST4 with Megafile 60 and SC1224 and SM125 monitors. These are a bit yellowed and the keyboard is thrashed. Also, the TOS is on a separate card with two leads that got loose and I don't know where they go (probably to +Vcc and a select pin). Thus, can't test the monitors or the hard disk, but the system does power on, and the hard disk does power up and makes happy hard disk noises. No idea what's on it. The SM125 puts on a power light and does appear to try to make a picture, though its previous owner separated it from its stand for some reason. The SC1224 sounds like the flyback is bad but may be serviceable. Includes ST mouse and hard disk cable. No manuals or software. If you want this unit, you need to take everything including the monitors. PARTIALLY WORKING: 500MHz iBook G3 laptop (snow, not colour) M6497 with tray loader optical drive and power supply. Does boot OS X, but needs a new LCD backlight (mini VGA port works and you can see the display in bright light) and battery is of course toast. Otherwise physically intact except that ex-bro-in-law put grotty stickers on it. PARTIALLY WORKING: Quad G5 2.5GHz x2x2, 8GB RAM, Nvidia 6600. Got whacked in shipping and one side of the case is damaged. No hard disk. Does power on but you will need to service the processors and the liquid cooling system. Aftermarket optical drive needs "help" when you eject it. Add your own USB keyboard and mouse. PARTIALLY WORKING: Sawtooth Power Mac G4 450MHz. No RAM, no video card, no hard disk. Used to be my file server but had issues with one of the PCI slots. Has optical drive and ZIP with matching Apple bezels. Does power on, but obviously without RAM or a video card (AGP) will not pass POST. Add your own USB keyboard and mouse. NOT WORKING: Single G5 1.8GHz, 2GB RAM, GeForce 5200. The previous owner seemed to have had a disagreement with the front panel connector and the front panel connector lost. I received it stripped to the chassis except for the processor and the logic board, but it does have the fans, video card, wireless (with T-antenna), power supply and panel cable. Because the front panel connector is busted I can't test it. You get to replace the front panel assembly and put it back together. This unit is air-cooled, but probably could benefit from reapplying thermal compound while you're at it. Has optical drive (disconnected), no hard disk, add your own USB keyboard and mouse. Various other items: Apple II Super Serial card with DB-25 670-0020-? (uses 6551 ACIA) and Apple IIe 80 column 64K memory expansion 607-0103-K. Can't test them but both look intact. Kurta Penmouse. Serial and PS/2 connectors. Seems to have a power supply jack (9V) but I don't have the power supply and I don't know if it needs it. Can't test it, no drivers, physically intact. Sun model 411 SCSI CD-ROM. Requires caddy. Won't mount discs, might need a recap. Samsung 17" SyncMaster CRT. Works fine, great shape, just too big to keep around anymore. UMAX Astra 2100U flatbed USB scanner with power supply. Powers on. Works with classic Mac OS but probably most systems. No driver disc. Pair of Telular SX5 GSM terminals. These were the server room's backup communication system. They work, but no GSM network to connect to anymore. Might be fun if you set one up. Real serial ports! Real GSM modem! Full kits with power supply. Visual UpTime Select T1 CSU/DSU. Has a Cisco V.35 cable connected and jacks for Ethernet, serial, DSX-1 and T1. Powers on, obviously goes right into Red Alarm since there's no network. You telco nerds will love it. Adaptec AHA-1542CF ISA SCSI card. I don't have a system to put this in. Looks fine, might work. No software or drivers. ATI PCI Rage XL card, VGA DE-15 port. Likely for PC, doesn't seem to have a Mac ROM. Good condition. No drivers. Diamond ATI Radeon HD 6450 PCIe card with DVI, VGA, HDMI. Has manual, no drivers. Good condition. Various complete external modem packages ranging from 14.4 to 33.6K. -- ------------------------------------ personal: http://www.cameronkaiser.com/ -- Cameron Kaiser * Floodgap Systems * www.floodgap.com * ckaiser at floodgap.com -- Man fears Time, yet Time fears the Pyramids. -- Arab proverb ---------------

4 years, 3 months

Multi-Micro-Channel bus systems, and thoughts on the Computer Society Digital Library.

by cz＠alembic.crystel.com

Read that Personal Systems magazine from 1992 that was recently posted and enjoyed the article on the PS/2 295 system. I never heard about that one, the biggest PS/2's I worked on were the 95 systems with 486 processors back at Covington. One thing that popped out: The 295 was a multi-processor-ish system with two MCA busses. Granted they were decoupled with each processor having its own MCA bus but it got me to thinking: Were there other systems of that time that could use two MicroChannel busses? I know of one: Back when I first started working at the IEEE Computer Society in 1993 they had a donated NCR 3550 system. Big box, mainframe sized with 4 486/50 CPUs in it and an MCA backplane. As I recall AT&T donated it to the CS but no one had a clue what to do with it. It ran NCR Unix which wasn't interesting but when we started putting together the first E-Commerce systems in 1994 I decided to use it with Windows NT. Oddly enough it could run NT 3.51 (and later NT 4 with a HAL) and we put it online with Netscape Commerce server. Ran great and just like that we were doing E-Commerce for SuperComputing/95 registrations. :-) Later we started building the Digital E-Library on it. We needed a system that could do a lot of SGML-HTML conversions quickly as well as render TEK Math to .gif in real time. So we upgraded the 3550 with 8 (later a total of 16) Pentium Pro CPUs and a second Microchannel bus. We split the disks up with 2 4 port SCSI adapters on each bus along with a network port each and balanced RAID1 and RAID5 disks across the channels on both busses. Worked surprisingly well and allowed us to load all of the CS periodicals on the system along with a big Lotus Notes server implementation to run the commerce software and store the E-Accounts (still in use today!). The E-commerce system allowed people to renew their memberships with credit cards, and of course add subscriptions both in paper and on-line with instant access once the credit card was charged. For mid-1990's timeframes this was pretty advanced stuff. Later when we composted PDFs we put those on there as well with the Article shopping cart so people could buy articles individually. Boy, people liked that a LOT. We did experiment with a digital credit system so people could buy points and use those to buy articles but I could never figure out how to make it tamper proof. Satoshi figured that one out a decade later, I wish I had thought of the checksum chain idea.... Oh well. But the big point: Running two MCA busses on a SMP based multiprocessor system was quite possible and do-able at scale, however did any other company make a dual MCA bus system? I always found it impressive that Windows supported even that stretch of a configuration (seeing 16 Pentium Pro CPUs running together as people hit the digital library en masse was *neat*) but I don't recall any other systems that did it. Thoughts?

4 years, 3 months

LCM Accounts?

by healyzh＠avanthar.com

Is it still possible to get accounts on the LCM systems? I wanted to get a login on the VAX 7000, but can?t figure out where to request an account. Zane

4 years, 3 months

Sourcing Capacitors for my H7140 PSU

by robert.jarratt＠ntlworld.com

I gave up trying to repair this PSU myself and I have got someone to do it professionally. It seems they have it working well but think that two capacitors should still be replaced. I think these are the two big "Coke Can" sized filter capacitors. The trouble is they seem to be unable to find any. The spec for them is 4500uf 200v DxH 76mm x 145mm Qty. 2. Anyone know where to find such monsters? In the UK ideally. I have looked on Farnell, Digikey and Mouser. It all seems to be special order, minimum quantity, long lead time etc. Thanks Rob

4 years, 3 months

Pro-Log M980 Programmer

by gerhard.kreuzer＠liftoff.at

Hi, I own a Pro-Log M980 Prom Programmer and want to program a 2732 EProm. I have everything needed, but how can I get the data in? There is a serial interface, did anybody have some program for a standard PC to handle that daa transfer? Cabling istn't an issue, can do it. Thanks for helping. With best regards Gerhard

4 years, 3 months

Anyone have any hardware docs on a Hyundai Super LT-3 80286 laptop?

by jncordoba＠gmail.com

Hi there guys!! I modded the battery with an external 2032 and now is booting fine. The HDD on my machine is an ALPS DRPO 20MB there is not info available about this HDD. Did you find or have any luck with this machine ?

4 years, 3 months

What's left of the Houston Museum stuff

by lee.gleason＠comcast.net

"Nice selection of dirty and yellowed computers in unknown condition." I just took a run out to the warehouse in question, figuring the owner would be there today cleaning up. The quote above sums up the state of things. There were some miscellaneous DEC terminals, a few MicroVAXes, and some other assorted DEC stuff - but it was all a trifle ...funky. That alone might not have been a sales stopper for me (all of my collection is not pristine), but the prices were a bit higher than I was prepared to pay for that condition and these circumstances. EG $125.00 for a VT220 w/o keyboard, and $90.00 for VT240 base units. I left empty handed. -- Lee K. Gleason N5ZMR Control-G Consultants lee.gleason at comcast.net

4 years, 3 months

What's left of the Houston Museum stuff

by aek＠bitsavers.org

https://www.facebook.com/groups/2103793056560583/permalink/3118441161762429/

4 years, 3 months

VA Vista

by bill.gunshannon＠hotmail.com

Only semi Classic as the subject has been around for a long time. I saw recently that the VA is moving to a new EHR System (not very successfully, so far). Does this mean that VA Vista and MUMPS are finally going to be scrapped? Anybody else hear anything? bill

4 years, 3 months

core matt repair

by pspan＠amerytel.net

I worked at a company called DMA located in Amery Wisconsin during the 80's and 90's that did do core mat repair. Yes, the gal that did the work used a scope. She replaced cores and wires. Good luck finding someone to do that work now. If I remember the process, first the mat was removed from the driver assembly, then the varnish was removed. Then the mat was repaired and revarnished and then reassembled and final test before returned to the customer. On 2021-07-20 12:00, cctech-request at classiccmp.org wrote: > Send cctech mailing list submissions to > cctech at classiccmp.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.classiccmp.org/mailman/listinfo/cctech > or, via email, send a message with subject or body 'help' to > cctech-request at classiccmp.org > > You can reach the person managing the list at > cctech-owner at classiccmp.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of cctech digest..." > > > Today's Topics: > > 1. Re: DEC PDP-8/e H212 core mat repair (steven at malikoff.com) > 2. Re: DEC PDP-8/e H212 core mat repair (Joshua Rice) > 3. Re: DEC PDP-8/e H212 core mat repair (Joshua Rice) > 4. Re: DEC PDP-8/e H212 core mat repair (Tom Hunter) > 5. Re: DEC PDP-8/e H212 core mat repair (Jules Richardson) > 6. Re: DEC PDP-8/e H212 core mat repair (Rod Smallwood) > 7. Tektronix 8002 microprocessor lab software (Jules Richardson) > 8. Re: Tektronix 8002 microprocessor lab software (Zane Healy) > 9. Re: Tektronix 8002 microprocessor lab software (Al Kossow) > 10. Re: Tektronix 8002 microprocessor lab software (Al Kossow) > 11. Re: Tektronix 8002 microprocessor lab software (Al Kossow) > 12. Re: Tektronix 8002 microprocessor lab software (Jules Richardson) > 13. Re: Tektronix 8002 microprocessor lab software (Jules Richardson) > 14. Re: Tektronix 8002 microprocessor lab software (Zane Healy) > 15. Re: Items Wanted (Jay Jaeger) > 16. Re: Items Wanted (Zane Healy) > 17. Re: DEC PDP-8/e H212 core mat repair (Toby Thain) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 19 Jul 2021 17:59:59 +1000 > From: steven at malikoff.com > To: "General Discussion: On-Topic and Off-Topic Posts" > <cctalk at classiccmp.org> > Subject: Re: DEC PDP-8/e H212 core mat repair > Message-ID: > <84f709701f774aebb1a07a8bbb6eb091.squirrel at webmail04.register.com> > Content-Type: text/plain;charset=utf-8 > > Tom said >> I am curious if anyone has attempted to repair (replace) a broken wire >> in a >> PDP-8/e H212 (MM8EJ) core mat (8 k word). The cores are not visible >> without >> a microscope. I cannot imagine how these were even manufactured and >> wonder >> if DEC service centers repaired core mat faults or if faulty boards >> were >> simply discarded. >> >> CDC 6600 cores were huge in comparison and I would not hesitate to >> replace >> a broken core wire on those. > > I have no idea how DEC made theirs but for IBM's System 360, one of > their engineers > came up with the clever idea of stretching the core wire so it necked > and broke, leaving > a work-hardened tapered point to thread the cores with. > They patented it https://patents.google.com/patent/US3314131A > (Source: page 187 of 'IBM's 360 and early 370 Systems' by Pugh et al) > On a Youtube film about the 360 they show cores being vibrated into the > correct > orientation on a jig board. > > > > ------------------------------ > > Message: 2 > Date: Mon, 19 Jul 2021 09:40:44 +0100 (BST) > From: Joshua Rice <rice43 at btinternet.com> > To: CCtalk <cctalk at classiccmp.org> > Subject: Re: DEC PDP-8/e H212 core mat repair > Message-ID: <55e9b1e8.2735f.17abdecb557.Webtop.91 at btinternet.com> > Content-Type: text/plain; charset=UTF-8; format=flowed > > > > > ------ Original Message ------ > From: "Tom Hunter via cctalk" <cctalk at classiccmp.org> > To: "General Discussion: On-Topic and Off-Topic Posts" > <cctalk at classiccmp.org> > Sent: Monday, 19 Jul, 2021 At 06:33 > Subject: DEC PDP-8/e H212 core mat repair > I am curious if anyone has attempted to repair (replace) a broken wire > in a > PDP-8/e H212 (MM8EJ) core mat (8 k word). The cores are not visible > without > a microscope. I cannot imagine how these were even manufactured and > wonder > if DEC service centers repaired core mat faults or if faulty boards > were > simply discarded. > CDC 6600 cores were huge in comparison and I would not hesitate to > replace > a broken core wire on those. > Best regards > Tom Hunter > > > I believe much of the core manufacturing for DEC minicomputers was > outsourced, but a lot of it had become much more automated by the late > 60's and early 70's. I believe it was done by machine, with a tray to > hold the toroids in place, and a very fine needle-like "bobbin" that > threaded the wires through the toroids. I believe threading the cores > by > hand had become largely obsolete by the time the PDP-8 came onto the > market. > Though i can't confirm it, i highly doubt that DEC engineers would > repair core planes. These would more likely be sent back to the > manufacturer for "recycling", with the cores being recovered and > reused. > It's worth noting that most computer manufacturers appreciated the > fragility of core memory planes at the time, with most of them being > protected with either PCB's or perspex/plastic shields on top of the > core planes. In this way, it was rather difficult for a clumsy ol' > technician to put his thumb through the planes as he was servicing > machines. > Josh > > > > > > ------------------------------ > > Message: 3 > Date: Mon, 19 Jul 2021 09:52:13 +0100 (BST) > From: Joshua Rice <rice43 at btinternet.com> > To: CCtalk <cctalk at classiccmp.org> > Subject: Re: DEC PDP-8/e H212 core mat repair > Message-ID: <5d5f0788.273f3.17abdf7399b.Webtop.91 at btinternet.com> > Content-Type: text/plain; charset=UTF-8; format=flowed > > > > > ------ Original Message ------ > From: "Tom Hunter via cctalk" <cctalk at classiccmp.org> > To: "General Discussion: On-Topic and Off-Topic Posts" > <cctalk at classiccmp.org> > Sent: Monday, 19 Jul, 2021 At 06:33 > Subject: DEC PDP-8/e H212 core mat repair > I am curious if anyone has attempted to repair (replace) a broken wire > in a > PDP-8/e H212 (MM8EJ) core mat (8 k word). The cores are not visible > without > a microscope. I cannot imagine how these were even manufactured and > wonder > if DEC service centers repaired core mat faults or if faulty boards > were > simply discarded. > CDC 6600 cores were huge in comparison and I would not hesitate to > replace > a broken core wire on those. > Best regards > Tom Hunter > > > These patents might be enlightening. I'm sure there's others, but these > are some i've found on a quick search. > https://patents.google.com/patent/US4161037A > <https://patents.google.com/patent/US4161037A> > https://patents.google.com/patent/US3668664 > <https://patents.google.com/patent/US3668664> > Josh > > > ------------------------------ > > Message: 4 > Date: Mon, 19 Jul 2021 19:02:25 +0800 > From: Tom Hunter <ccth6600 at gmail.com> > To: Joshua Rice <rice43 at btinternet.com>, "General Discussion: > On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> > Subject: Re: DEC PDP-8/e H212 core mat repair > Message-ID: > <CAALEduCP_GLHuuMG2UO3CU329-_3E=RPqzVZ+RUGC6gTVQNFow at mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Thanks Josh, > > I read through both patents but struggled to fully understand what they > described. > Unfortunately patents are written in broad terms to cover as much as > possible. > > It was very interesting nevertheless. > > Best regards > Tom Hunter > > On Mon, Jul 19, 2021 at 4:52 PM Joshua Rice via cctalk < > cctalk at classiccmp.org> wrote: > >> >> >> >> ------ Original Message ------ >> From: "Tom Hunter via cctalk" <cctalk at classiccmp.org> >> To: "General Discussion: On-Topic and Off-Topic Posts" >> <cctalk at classiccmp.org> >> Sent: Monday, 19 Jul, 2021 At 06:33 >> Subject: DEC PDP-8/e H212 core mat repair >> I am curious if anyone has attempted to repair (replace) a broken wire >> in a >> PDP-8/e H212 (MM8EJ) core mat (8 k word). The cores are not visible >> without >> a microscope. I cannot imagine how these were even manufactured and >> wonder >> if DEC service centers repaired core mat faults or if faulty boards >> were >> simply discarded. >> CDC 6600 cores were huge in comparison and I would not hesitate to >> replace >> a broken core wire on those. >> Best regards >> Tom Hunter >> >> >> These patents might be enlightening. I'm sure there's others, but >> these >> are some i've found on a quick search. >> https://patents.google.com/patent/US4161037A >> <https://patents.google.com/patent/US4161037A> >> https://patents.google.com/patent/US3668664 >> <https://patents.google.com/patent/US3668664> >> Josh >> > > > ------------------------------ > > Message: 5 > Date: Mon, 19 Jul 2021 16:50:10 -0500 > From: Jules Richardson <jules.richardson99 at gmail.com> > To: cctalk at classiccmp.org > Subject: Re: DEC PDP-8/e H212 core mat repair > Message-ID: <769e6168-9024-fa20-5b9c-ed1cb91ec641 at gmail.com> > Content-Type: text/plain; charset=iso-8859-15; format=flowed > > On 7/19/21 3:40 AM, Joshua Rice via cctalk wrote: >> I believe much of the core manufacturing for DEC minicomputers was >> outsourced, but a lot of it had become much more automated by the late >> 60's >> and early 70's. > > I've got a trio of planes here, two of which are from a Lockheed > MAC-16, > but the other one is made by Keronix out of Santa Monica for an unknown > machine (dated 1973, model number "P4" and p/n 816335 if that means > anything to anyone, approx 16"x16" with two 100-pin, double-sided > finger > edge connectors on 0.1" spacing). > > Anyhoo, the Keronix one has a sticker on it saying it was repaired by > DMA, > inc. in Amery, WI in 1980 - which might suggest that there were third > parties around working on boards, rather than them having to go back to > the > manufacturer for repair. (I have no idea what the nature of the repair > was, > of course; maybe it was to surrounding logic rather than the mat > itself). > >> It's worth noting that most computer manufacturers appreciated the >> fragility of core memory planes at the time, with most of them being >> protected with either PCB's or perspex/plastic shields on top of the >> core >> planes. > > Yes, that's how all the ones I've ever seen have been. The Keronix one > has > an additional shield over the top of the entire PCB, on top of the one > protecting the cores. > > Jules > > > ------------------------------ > > Message: 6 > Date: Mon, 19 Jul 2021 23:06:26 +0100 > From: Rod Smallwood <rodsmallwood52 at btinternet.com> > To: Jules Richardson via cctalk <cctalk at classiccmp.org> > Subject: Re: DEC PDP-8/e H212 core mat repair > Message-ID: <d5251315-3f4c-3a46-e36e-71949a90c26e at btinternet.com> > Content-Type: text/plain; charset=iso-8859-15; format=flowed > > > Yes most core stringing was outsourced. > > By hand under magnification was used. > > I cant recall any references to automation. > > That would br down to the supplier. > > The story I heard was at least some were done by embroidery girls in > Hong Kong > > Rod Smallwood ? -- Digital Equipment Corporation? 1975 to 1985 > > > On 19/07/2021 22:50, Jules Richardson via cctalk wrote: >> On 7/19/21 3:40 AM, Joshua Rice via cctalk wrote: >>> I believe much of the core manufacturing for DEC minicomputers was >>> outsourced, but a lot of it had become much more automated by the >>> late 60's and early 70's. >> >> I've got a trio of planes here, two of which are from a Lockheed >> MAC-16, but the other one is made by Keronix out of Santa Monica for >> an unknown machine (dated 1973, model number "P4" and p/n 816335 if >> that means anything to anyone, approx 16"x16" with two 100-pin, >> double-sided finger edge connectors on 0.1" spacing). >> >> Anyhoo, the Keronix one has a sticker on it saying it was repaired by >> DMA, inc. in Amery, WI in 1980 - which might suggest that there were >> third parties around working on boards, rather than them having to go >> back to the manufacturer for repair. (I have no idea what the nature >> of the repair was, of course; maybe it was to surrounding logic rather >> than the mat itself). >> >>> It's worth noting that most computer manufacturers appreciated the >>> fragility of core memory planes at the time, with most of them being >>> protected with either PCB's or perspex/plastic shields on top of the >>> core planes. >> >> Yes, that's how all the ones I've ever seen have been. The Keronix one >> has an additional shield over the top of the entire PCB, on top of the >> one protecting the cores. >> >> Jules > > > ------------------------------ > > Message: 7 > Date: Mon, 19 Jul 2021 18:03:46 -0500 > From: Jules Richardson <jules.richardson99 at gmail.com> > To: CCtalk <cctalk at classiccmp.org> > Subject: Tektronix 8002 microprocessor lab software > Message-ID: <5b8f634d-93c9-22c2-fd05-6e1937767883 at gmail.com> > Content-Type: text/plain; charset=iso-8859-15; format=flowed > > > Just out of interest, is the software for the Tektronix 8002 > microprocessor > lab archived out there anywhere? > > What I believe is one popped up on one of my Facebook groups, and it'd > be a > trek to get it even if I can arrange a good price with the current > owner - > but it sounds like the software at the site, if it still exists, is > unlikely to surface from a huge pile of detritus, so that automatically > puts things right in boat anchor territory. > > There may or may not be a terminal, too; I get the impression those > were > optional (I've been told that there are two Tek terminals, I just don't > know if they're the right models for this system). > > > cheers > > Jules > > > ------------------------------ > > Message: 8 > Date: Mon, 19 Jul 2021 16:11:32 -0700 > From: Zane Healy <healyzh at avanthar.com> > To: Jules Richardson <jules.richardson99 at gmail.com>, "General > Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> > Subject: Re: Tektronix 8002 microprocessor lab software > Message-ID: <ED3B17DB-6591-493A-B470-D940A5E18A91 at avanthar.com> > Content-Type: text/plain; charset=utf-8 > > You might check with the Tektronix museum, and see what they know. As > far as I know, they aren?t actually part of Tektronix. > > Zane > > > >> On Jul 19, 2021, at 4:03 PM, Jules Richardson via cctalk >> <cctalk at classiccmp.org> wrote: >> >> >> Just out of interest, is the software for the Tektronix 8002 >> microprocessor lab archived out there anywhere? >> >> What I believe is one popped up on one of my Facebook groups, and it'd >> be a trek to get it even if I can arrange a good price with the >> current owner - but it sounds like the software at the site, if it >> still exists, is unlikely to surface from a huge pile of detritus, so >> that automatically puts things right in boat anchor territory. >> >> There may or may not be a terminal, too; I get the impression those >> were optional (I've been told that there are two Tek terminals, I just >> don't know if they're the right models for this system). >> >> >> cheers >> >> Jules > > > > ------------------------------ > > Message: 9 > Date: Mon, 19 Jul 2021 16:15:11 -0700 > From: Al Kossow <aek at bitsavers.org> > To: Jules Richardson via cctalk <cctalk at classiccmp.org> > Subject: Re: Tektronix 8002 microprocessor lab software > Message-ID: <395e3439-3632-33ea-9579-883ad602b8e5 at bitsavers.org> > Content-Type: text/plain; charset=iso-8859-15; format=flowed > > On 7/19/21 4:03 PM, Jules Richardson via cctalk wrote: >> >> Just out of interest, is the software for the Tektronix 8002 >> microprocessor lab archived out there anywhere? > > I have some but it is hard-sectored so I've never tried to read it. > > It's pretty unlikely anyone at the tek museum would have tried to > recover > the floppies even if they had them. > > One of my 'really like to try to recover' things at CHM is we have a > bunch of floppies from > the company that designed it for Tek, but someone put a center punch > through every disk, so > I'm going to have to take them out of the jacket and try to flatten > the dent out as best as > I can. > > > > ------------------------------ > > Message: 10 > Date: Mon, 19 Jul 2021 16:20:19 -0700 > From: Al Kossow <aek at bitsavers.org> > To: cctalk at classiccmp.org > Subject: Re: Tektronix 8002 microprocessor lab software > Message-ID: <a0c2c3a7-4c74-81da-1f40-a581d3f29fda at bitsavers.org> > Content-Type: text/plain; charset=iso-8859-15; format=flowed > > On 7/19/21 4:03 PM, Jules Richardson via cctalk wrote: >> >> Just out of interest, is the software for the Tektronix 8002 >> microprocessor lab archived out there anywhere? >> > > It would be nice to save a complete system though, since most have > been tossed out since there is little > practical use for them now. I never had a whole one, just board sets > for various processors that I collected > over the years. > > > > > ------------------------------ > > Message: 11 > Date: Mon, 19 Jul 2021 16:25:21 -0700 > From: Al Kossow <aek at bitsavers.org> > To: Al Kossow via cctalk <cctalk at classiccmp.org> > Subject: Re: Tektronix 8002 microprocessor lab software > Message-ID: <f4bafaa8-f4d9-95aa-016e-68d36d7c8b8a at bitsavers.org> > Content-Type: text/plain; charset=iso-8859-15; format=flowed > > On 7/19/21 4:20 PM, Al Kossow via cctalk wrote: >> On 7/19/21 4:03 PM, Jules Richardson via cctalk wrote: > >> It would be nice to save a complete system though, since most have >> been tossed out since there is little >> practical use for them now. > > I've collected a LOT of in-circuit emulators and microprocessor > development systems over the decades, and > I'm trying to decide right now what I'm going to do with them. > > > > ------------------------------ > > Message: 12 > Date: Mon, 19 Jul 2021 19:53:25 -0500 > From: Jules Richardson <jules.richardson99 at gmail.com> > To: cctalk at classiccmp.org > Subject: Re: Tektronix 8002 microprocessor lab software > Message-ID: <8d864579-a8be-c8b1-9734-d208d0c10bcf at gmail.com> > Content-Type: text/plain; charset=iso-8859-15; format=flowed > > On 7/19/21 6:20 PM, Al Kossow via cctalk wrote: >> On 7/19/21 4:03 PM, Jules Richardson via cctalk wrote: >>> >>> Just out of interest, is the software for the Tektronix 8002 >>> microprocessor lab archived out there anywhere? >>> >> >> It would be nice to save a complete system though, since most have >> been >> tossed out since there is little >> practical use for them now. > > Well sadly it's looking like game over. By the sounds of it there's a > basement full of old equipment and boards, and a scrapper out in OH has > offered $6k for the lot, sight unseen, just on the hope that they can > make > a buck on the gold and palladium content. > > The next offer seems to be from someone who's planning on just dumping > it > on ebay - so if the scrapper deal falls through maybe it'll resurface > on > That Auction Site for lolprice... > > This is starting to feel like one of those situations where it's a huge > shame that the original owner of this stuff didn't have a will > expressing > what should be done with it all. > > > > ------------------------------ > > Message: 13 > Date: Mon, 19 Jul 2021 20:17:27 -0500 > From: Jules Richardson <jules.richardson99 at gmail.com> > To: cctalk at classiccmp.org > Subject: Re: Tektronix 8002 microprocessor lab software > Message-ID: <a734724d-b7f5-deb8-6e1f-10e429e8f43f at gmail.com> > Content-Type: text/plain; charset=iso-8859-15; format=flowed > > On 7/19/21 7:53 PM, Jules Richardson via cctalk wrote: >> Well sadly it's looking like game over. By the sounds of it there's a >> basement full of old equipment and boards, and a scrapper out in OH >> has >> offered $6k for the lot, sight unseen, just on the hope that they can >> make >> a buck on the gold and palladium content. > > annnnd... right after I hit send on that, things start looking up > again. > The guy responsible for this stuff doesn't seem to want it to get > scrapped > any more than I do, and he got in touch with folks down at Cape > Canaveral > (there are various ex-NASA things in the pile), then talked to the > family > of the estate; it sounds like some of it at least might get donated to > the > collection down there. > > I'm not sure about non-NASA things at this point, we'll see - but it > sounds > like there's interest now in not junking it, at least! > > Jules > > > > ------------------------------ > > Message: 14 > Date: Mon, 19 Jul 2021 19:56:29 -0700 > From: Zane Healy <healyzh at avanthar.com> > To: Jules Richardson <jules.richardson99 at gmail.com>, "General > Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> > Subject: Re: Tektronix 8002 microprocessor lab software > Message-ID: <DE9B0230-1D5D-4416-992D-6B60A7886F17 at avanthar.com> > Content-Type: text/plain; charset=utf-8 > > On Jul 19, 2021, at 6:17 PM, Jules Richardson via cctalk > <cctalk at classiccmp.org> wrote: >> >> On 7/19/21 7:53 PM, Jules Richardson via cctalk wrote: >>> Well sadly it's looking like game over. By the sounds of it there's a >>> basement full of old equipment and boards, and a scrapper out in OH >>> has offered $6k for the lot, sight unseen, just on the hope that they >>> can make a buck on the gold and palladium content. >> >> annnnd... right after I hit send on that, things start looking up >> again. The guy responsible for this stuff doesn't seem to want it to >> get scrapped any more than I do, and he got in touch with folks down >> at Cape Canaveral (there are various ex-NASA things in the pile), then >> talked to the family of the estate; it sounds like some of it at least >> might get donated to the collection down there. >> >> I'm not sure about non-NASA things at this point, we'll see - but it >> sounds like there's interest now in not junking it, at least! >> >> Jules > > That?s a bit of good news! > > Zane > > > > > ------------------------------ > > Message: 15 > Date: Mon, 19 Jul 2021 22:03:49 -0500 > From: Jay Jaeger <cube1 at charter.net> > To: cctalk at classiccmp.org > Cc: "General Discussion: On-Topic and Off-Topic Posts" > <cctalk at classiccmp.org> > Subject: Re: Items Wanted > Message-ID: <9ac110f9-2407-c9ba-6ec5-d70e9fd10d26 at charter.net> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 7/11/2021 9:33 AM, Eric Moore via cctalk wrote: >> Hello, I am looking for any of the following items. I have terminals >> and >> assorted qbus and S100 cards for trade, or am happy to discuss payment >> :). >> >> 1) Qbus scsi card > > You and me both. ;) I have one - and I intend to keep it. > >> 2) Emulex TC01 >> 3) QBUS bus probe >> 4) SD2SCSI > > Do you mean a device that emulates a SCSI drive with an SD card? Why > not just go out and purchase a SCSI2SD V5.1 - a little slower than the > newer ones, but works fine in my Sun, SGI and Intergraph Boxen. > > I also just bought one of the less expensive Androda SCSI emulators - > designed for Macs, really, but it might work and it is relatively > inexpensive. > >> 5) Teletype DRPE or ARPE (already have a BRPE) paper tape punches >> 6) AED/tektronix/SGI/etc... graphics terminal > > FYI, if you have "Pizza Boxes" then I have found that the cable > commonly > available (VGA one end, 13W3 on the other - the one with switches on > it) > works well on both Sun and SGI Boxen. Google Sun VGA 13W3 on eBay. > You probably want the one with the switches.) > >> 7) Unfomatted pertec controller (any bus) > > I have some old Pertec formatters that have no bus interface. Free to > good homes. Some were mouse houses for a while, but were subsequently > cleaned up reasonably well. Models F649-72 (2 of those) and F649-40. > Heavy to ship. > > In addition, I think I have a TC031, Pertec/QBus (I think) that I > really > am not using. I tried it out once - I think the issue was that I had a > Pertec interface speed mismatch between it and the HP drive I have with > a Pertec interface (which also has issues with loading tape.) I > suspect it is formatted, however. > >> 8) S100 jade bus probe, system monitor board, or similar >> 9) Anything fabri-tek, Gould, or SEL > > I have a Fabritek memory box. I think it was on a PDP-12, but am not > 100% certain without going back and looking at old paperwork. I am not > sure of its condition, electrically speaking - whether it had slots for > cables, or cables coming out of it, and if the latter, whether they are > intact. It has been stored in my basement for decades, low and dray. > That would take some work to pry out of my hands. > >> 10) blinkenlights and flippenpaddles computers, any interesting front >> panels, etc... >> 11) ESDI disk emulator > > I am not aware of any such beasties in the wild. MFM, yes, but I > haven't seen ESDI. I would love for such a thing to exist, thinking > of > my Apollo, 3B2 and IBM RT/PC workstations. > >> >> Thank you! >> >> -Eric >> > > > > ------------------------------ > > Message: 16 > Date: Mon, 19 Jul 2021 21:00:27 -0700 > From: Zane Healy <healyzh at avanthar.com> > To: Jay Jaeger <cube1 at charter.net>, "General Discussion: On-Topic and > Off-Topic Posts" <cctalk at classiccmp.org> > Subject: Re: Items Wanted > Message-ID: <3EFC578F-97F0-468A-B3F1-8E4C17094843 at avanthar.com> > Content-Type: text/plain; charset=utf-8 > > On Jul 19, 2021, at 8:03 PM, Jay Jaeger via cctalk > <cctalk at classiccmp.org> wrote: >> >> On 7/11/2021 9:33 AM, Eric Moore via cctalk wrote: >>> Hello, I am looking for any of the following items. I have terminals >>> and >>> assorted qbus and S100 cards for trade, or am happy to discuss >>> payment :). >>> 1) Qbus scsi card >> >> You and me both. ;) I have one - and I intend to keep it. > > Yeah, they are sort of a necessity. > >>> 4) SD2SCSI >> >> Do you mean a device that emulates a SCSI drive with an SD card? Why >> not just go out and purchase a SCSI2SD V5.1 - a little slower than the >> newer ones, but works fine in my Sun, SGI and Intergraph Boxen. > > The SCSI2SD v5.1 should be faster than the Q-Bus. I bought several > recently, and plan to put one in my PDP-11/73. I even opted for these > for my VAXstation 4000?s. I figure I?ll use the newer ones in an > AlphaStation. > >>> 11) ESDI disk emulator >> >> I am not aware of any such beasties in the wild. MFM, yes, but I >> haven't seen ESDI. I would love for such a thing to exist, thinking >> of my Apollo, 3B2 and IBM RT/PC workstations. > > I?d also love to have one of these, preferably using SD or CF cards. > The Webster WQESD/04 card is a fantastic card, it?s only downfall is > that it works with ESDI drives, rather than SCSI, and they?re big and > loud. :-) > > Zane > > > > > > ------------------------------ > > Message: 17 > Date: Mon, 19 Jul 2021 18:16:28 -0400 > From: Toby Thain <toby at telegraphics.com.au> > To: "General Discussion: On-Topic and Off-Topic Posts" > <cctalk at classiccmp.org> > Subject: Re: DEC PDP-8/e H212 core mat repair > Message-ID: <820d43ed-e32d-4394-4038-bb662f5e6798 at telegraphics.com.au> > Content-Type: text/plain; charset=iso-8859-15 > > On 2021-07-19 6:06 p.m., Rod Smallwood via cctalk wrote: >> >> Yes most core stringing was outsourced. >> > > There's more detail on early core production in the book "IBM's Early > Computers", iirc. (And possibly "A Few Good Men From Univac".) > > >> ... >> Rod Smallwood ? -- Digital Equipment Corporation? 1975 to 1985 >> >> >> On 19/07/2021 22:50, Jules Richardson via cctalk wrote: >>> On 7/19/21 3:40 AM, Joshua Rice via cctalk wrote: >>>> I believe much of the core manufacturing for DEC minicomputers was >>>> outsourced, but a lot of it had become much more automated by the >>>> late 60's and early 70's. >>> >>> I've got a trio of planes here, two of which are from a Lockheed >>> MAC-16, but the other one is made by Keronix out of Santa Monica for >>> an unknown machine (dated 1973, model number "P4" and p/n 816335 if >>> that means anything to anyone, approx 16"x16" with two 100-pin, >>> double-sided finger edge connectors on 0.1" spacing). >>> >>> Anyhoo, the Keronix one has a sticker on it saying it was repaired by >>> DMA, inc. in Amery, WI in 1980 - which might suggest that there were >>> third parties around working on boards, rather than them having to go >>> back to the manufacturer for repair. (I have no idea what the nature >>> of the repair was, of course; maybe it was to surrounding logic >>> rather >>> than the mat itself). >>> >>>> It's worth noting that most computer manufacturers appreciated the >>>> fragility of core memory planes at the time, with most of them being >>>> protected with either PCB's or perspex/plastic shields on top of the >>>> core planes. >>> >>> Yes, that's how all the ones I've ever seen have been. The Keronix >>> one >>> has an additional shield over the top of the entire PCB, on top of >>> the >>> one protecting the cores. >>> >>> Jules > > > > End of cctech Digest, Vol 82, Issue 15 > **************************************

4 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb